Advertisement
• Connecting
Amplifier
(5.1 ch Surround
system)
[Digital
connection]
DECK,I'Dolby
Digital
Decoder
=l,Amplifier,bSpeaker
or
DECK,_
DTS (digital theater systems)
Decoder
=l,Amplifier
=l,Speaker
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital decoder or DTS decoder, you can
enjoy theater-quality
audio in your home. [An optical digital audio cable (optional)
is required when an optional Dolby Digital decoder or DTS decoder is used.]
Notes on connecting an optical
digital audio cable (optional)
• Firmly conrtect the cable to the
Connector.
/
Surround
Surround
5_eaker
5_eaker
5.1ch Surround
s
(Real')
b¥ont
Speaker
Optical Digital
Audio Cable
(optional)
To Optical
Digital Audio
Input Connector
Caution
for optical
digital
audio output
connector:
• When connecting
an amplifier
(with an Optical
Digital
Input
Connector)
which does not
contain the Dolby Digital or DTS decoder, be sure to select "PCM" at "Dolby
Digital"
and "PCM" at "dts" of the Settings
for DVD Operation
"AUDIO
OUTPUT"
(see p. 48).
Otherwise,
any attempt
to play DVDs may cause such a high level
of noise that it may
be harmful to your ears and damage
your speakers.
• When a Dolby Digital/DTS
decoder
is connected,
please select "Bitstream"
at "dts"
or
"Dolby
Digital" of the Settings
for DVD Operation
"AUDIO
OUTPUT".
If "PCM" is selected, there will be stereo sound. (See p. 48).
• Video CDs and CDs can be played as usual.
Note:
• Some DTS decoders which do not support
DVD-DTS interface may not work properly with
DECK.
15
Advertisement
