Advertisement
• If your"IV has AUDIO and VIDEO IN terminals, connect them to DECK for higher
quality picture and sound.
• You can enjoy stereo sound even if your TV is not stereo by connecting
a stereo
amplifier to DECK.
• Connect DECK and TV with an RF Coaxial Cable _
(supplied) or an AV Cable @
(net supplied) as shown in the figure below.
II
DSSReceiver_DECK_TV
II DECK_TV
III Cable Box d_DECK_I, TV
D 1/D/VCR DECK
Disconnect antenna or oab{e _'rom TV
and connect to DECK.
2
Connect DECK to "PCwith P,F Coaxial Cable.
a_ RF COAXIAL CABLE
\\
\_l
AV CABLE(notsuppLied)
WARNING
j
When using "Nut type" RF coaxial cables, tighten with ]
fingers only. Overtightening
may damage terminals.
J
Note to CABLE
system installer
,
]
This reminder
is provided to call the CABLE system installer s attention to Article 820-40 of the
NEC in USA (and to the Canadian
Electrical Code in Canada) that provides guidelines
for proper
grounding
and, in particular, specifies
that the cable ground shall be connected
to the grounding
system of the bai{ding, as c(oss to the point of cabte entry as practical
Advertisement
