Panasonic DOUBLEFEATURE Omnivision PV-D4743 Operating Instructions Manual page 16

3
Turn TV on.
See connections (_ RF Coaxial Cable Connection and @ AV Cable Connection on p. 12.
<RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO.
[DECK "_ TV]
• Go to "Doing Initial Setup (Ready to Play)." (See below.)
[Cable Box ÷ DECK ->- TV], [DSS ->- DECK ÷ TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone.
• If you use a DSS Receiver, it must be turned off.
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel
and clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR's output channel, please refer to "VCR's Output Channel" on p. 19.
Plugging the AC Power Plug into
an AC outlet
\ / Jj
CH AL_O SET PROCEEDING_
j
CANCEL: STO_'
AL_O CLOCK SET
pROCEEDING
CANCEL:STOP
• Function buttons are inoperative during Initial Setup.
• To remove a cassette during Auto Set, press EJECT on
the remote or STOP/EJECT twice on the DECK.
In this case, settings must be made manually. (See p. 18.)
• Depending on conditions, Auto Clock Set may take longer
than 30 minutes. If so, press STOP to stop setup and
perform settings manually. (See p. 18.)
Con tinued on next page...
16