Frost Protection - Heatmiser neo Stat-HC1 Manual

Frost Protection/Standby
Use the Left / Right keys to scroll to the Power Icon .......................................................
The frost icon will toggle ON/OFF each time Tick is pressed ..................................................
In this mode, the 'neoStat-HC1' will display the frost icon and will only turn the heating ON
should the room temperature drop below the set frost temperature. If the heating is
turned ON whilst in frost mode, the ame symbol will be displayed.
To cancel the frost protect mode, navigate to the Power button again and press
Tick ............................................................................................................................... . ...................................
In cooling and ventilation mode the thermostat will go to 'Standby' .
20
neo Stat-HC1