Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Heatmiser Touch
Summary of Contents for Heatmiser Touch
- Page 1 Model: Touch Model: PRT-RPTS...
-
Page 2: Product Image
Model: Touch Touch Series... -
Page 3: Table Of Contents
Optional Settings - Features Table Temperature Display Temperature Display Re-calibrating the Thermostat Comfort Levels Explained Factory Reset Factory Reset 11-12 Clean Screen Clean Screen Error Code E2 Locking the Keypad Wiring Diagrams Wiring Diagrams 26-28 26-28 Temperature Control Temperature Control Notes 29-30 Model: Touch... -
Page 4: What Is A Programmable Room Thermostat
The way to set and use your programmable room thermostat is to find the lowest temperature settings that you are comfortable with at the different times you have chosen, and then leave it alone to do its job. Touch Series... - Page 5 Programmable room thermostats need a free flow of air to sense the temperature, so they must not be covered by curtains or blocked by furniture. Nearby electric fires, televisions, wall or table lamps may also prevent the thermostat from working properly. Model: Touch...
-
Page 6: Installation Procedure
LCD screen as this may cause irreparable damage. This Touch Series thermostat is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation. - Page 7 Model: Touch...
- Page 8 Touch Series...
-
Page 9: Lcd Display
Cancel Button - Used to exit setup/program operations. Setup/Programming Keys - Used to navigate setup options. Current Temp - Indicates the current sensor temperature. Units of Temperature - Degrees Celsius or Fahrenheit. Comfort Level Selection Keys - Used in comfort level setup (see page 11). Model: Touch... -
Page 10: Setting The Clock
Use the Down key to set the hours ..............• Use the Up key to set the minutes ..............• Use the Day key to set the day of the week ..........• Press DONE to confirm and exit ................ Hours Minutes Change Minutes Change Hours Touch Series... -
Page 11: Temperature Display
The temperature display information is driven by two different inputs; the sensor measurement and the target temperature you have set. Room Temperature SET Temperature This is the current room temperature. This is the temperature you are trying to achieve in your home. Model: Touch... -
Page 12: Comfort Levels Explained
Default comfort levels are pre-programmed but you can change them easily. Weekday Level Time Temp Wake 08:00 21°C Leave 09:30 16°C Return 16:30 22°C Sleep 23:00 17°C Weekend Level Time Temp Wake 09:00 21°C Leave 22:00 16°C Return --,-- --°C Sleep --,-- --°C Touch Series... - Page 13 In 5/2 Day mode the thermostat will display In 7 Day mode, the thermostat will “Sat Sun” prompting you to program the display Tue. temperature levels for the weekend. • When complete, press DONE to confirm settings and exit .... Model: Touch...
-
Page 14: Clean Screen
To activate the lock press the bottom right corner of the display and hold for 10 secs. • When activated, you will see the Keypad Lock symbol. • To cancel, press the bottom right corner of the display again for 10 secs. Keypad Lock Indicator Touch Series... -
Page 15: Temperature Control
Select the desired temperature and press to confirm and exit. to confirm and exit. Note: In programmable mode, this new temperature is maintained only until the next programmed comfort level. In non-programmable mode, this temperature will be constantly maintained. Set Temperature Set Icon Model: Touch... -
Page 16: Temperature Hold
Use the center set of Up/Down keys to set the hold temperature ....• Press DONE to confirm and exit ................. Hold Icon Hold Time Hold Temperature To cancel a Temperature Hold, follow the same steps but reduce the time to 00:00. Touch Series... -
Page 17: Holiday Programming
Friday for 2 days, Saturday will be counted as the first day and the thermostat will revert back to the programmed schedule at 00:00 on Monday. Holiday Icon Holiday Days To cancel a Holiday setting, reduce the Holiday time to 00 days. Model: Touch... -
Page 18: Frost Protection
(see page 19). Should the heating be turned on whilst in frost mode, the flame symbol will be displayed. To cancel the frost protect mode, press the OFF button ............ Frost Protection Mode Enabled Touch Series... -
Page 19: Heating On/Off
To turn the thermostat OFF completely, press and hold the OFF key ....The display and heating output will be turned off completely.* To turn the thermostat back ON, press the ON key once ..........Thermostat completely OFF Thermostat powered ON *See Feature 3 on page 19 Model: Touch... -
Page 20: Optional Features Explained
Feature 07 – Temperature Up/Down Limit: This function allows you to limit the use of the up and down keys. This limit is also applicable when the thermostat is locked and so allows you to give others limited control over the heating system. Touch Series... - Page 21 Feature 12 – Programming Mode: The following program modes are available; Non-Programmable – Basic up/down override temperature control. 5/2 Day Programming – 4 levels for the weekdays and 4 different levels for the weekend. 7 Day Programming – 4 levels for each day. Model: Touch...
-
Page 22: Adjusting The Optional Settings
Use the Up/Down keys at the top of the screen to select the feature number (shown on page 22) and then use the Up/Down keys in the center to adjust the setting ................... • Press DONE to confirm settings and exit ..............Touch Series... -
Page 23: Optional Settings - Features Table
01 = 01hr, 02 = 02hr, 03 = 03hr Rate of Change Rate of Change Minutes to raise by 1°C Minutes to raise by 1°C Program Mode 00 = Non-Programmable 01 = 5/2 Day Programming 02 = 7 Day Programming Model: Touch... -
Page 24: Re-Calibrating The Thermostat
• Use the Up/Down keys to configure the new temperature ......• Press DONE to confirm the new temperature ..............• Press the ON key once to turn the thermostat back ON ..........Calibration Temperature Setting Set Icon Touch Series... -
Page 25: Factory Reset
Press and hold the bottom left corner of the LCD for 10 seconds. • All of the screen icons will appear for 2 seconds and then disappear. • Press the ON key once to turn the thermostat display back ON ......All icons displayed simultaneously. Factory reset is complete. Model: Touch... -
Page 26: Error Code E2
If Error Code E2 is displayed on screen, the thermostat is configured to use the remote air sensor but is unable to detect any input. Check the sensor is correctly connected to the RT1 and - terminals at the rear of the thermostat (see wiring diagrams on page 26-28). Touch Series... - Page 27 Wiring Diagram - Touch wired to Boiler (230v) THIS UNIT MUST BE PROTECTED BY A FUSE OR RCD TO CONNECT BOILER CONSULT BOILER MANUFACTURERS DIAGRAM 85-230VAC 50/60HZ TO BOILER S/L SUPPLY IN NEUTRAL REMOTE PROBE LIVE A1 A2 Remote 230VAC...
- Page 28 Wiring Diagram - Touch wired to Boiler (Voltfree) THIS UNIT MUST BE PROTECTED BY A FUSE OR RCD TO CONNECT BOILER CONSULT BOILER MANUFACTURERS DIAGRAM 85-230VAC 50/60HZ SUPPLY IN VOLTFREE TO BOILER NEUTRAL REMOTE PROBE LIVE A1 A2 Remote 230VAC...
- Page 29 Wiring Diagram - Touch wired to Spring Return Valve (230v) THIS UNIT MUST BE PROTECTED BY A FUSE OR RCD TO CONNECT BOILER CONSULT BOILER MANUFACTURERS DIAGRAM NEUTRAL TO BOILER 85-230VAC 50/60HZ SUPPLY IN NEUTRAL HEATING VALVE LIVE REMOTE PROBE...
-
Page 30: Notes
Notes ........................................................................................................................................................................................................................................................................................................................................................................................................................................................Touch Series... - Page 31 Notes ........................................................................................................................................................................................................................................................................................................................................................................................................................................................Model: Touch...
- Page 32 Want More Information? Call our support team on: +44 (0)1254 669090 www.heatmiser.com Twitter: @heatmiseruk Facebook: facebook.com/thermostats Series Rev 2.0...
Need help?
Do you have a question about the Touch and is the answer not in the manual?
Questions and answers