Toshiba T100 Manual page 8

TOSHIBA provides an RS-232C interface to allow your T100 to
communicate with a variety of other computers.
Learning to use your T100 1s easy. Just follow these simple steps and
the instructions in this manual.
STEP 1: Unpack and install your equipment. SEE PART 1 OF
THIS OWNER'S MANUAL.
STEP 2: Learn to operate the various components. SEE PART 2.
STEP 3: Consult, if necessary, the "Trouble-Shooting"' section.
SEE PART 3.
STEP 4: Learn about programming on the T100. SEE PART 4.
The instructions in this manual apply only to the installation and
operation of TOSHIBA T100 units. This manual is written to
explain every step as carefully as possible. If you are an experienced
computer user, you may only need to scan parts of the material.
Appendices offer additional information:
Appendix A Care and maintenance of your T100, as well as very
important facts about the T100 service policy.
Appendix B Instructions for those who wish to use a cassette for
storage.
Appendix C List of control characters.
Appendix D Information on using telecommunications.
Appendix E Data on hardware specifications.
Appendix F Parts listing.
AFTER THIS MANUAL:
Consult the Programmer's Reference Manual to learn about the
language commands, statements and functions. If you are using the
CP/M disk, consult the Programmer's Reference Manual for a
synopsis of CP/M use.
-ii-