Table of Contents
Advertisement
Technical data
Sound pressure level L
pA
Vibration a
(EN 60335):
h
Protection class:
Battery and charger information (not included in the scope of
delivery)
Only use the device with Active Energy® batteries and chargers that meet the
following technical specifications:
Suitable for Active Energy®
Batteries of the type:
Models:
Charging time:
Chargers of the type:
Models:
Please note the technical specifications for the battery and the charger.
Warning: The stated vibration emission value was measured using a standardised
test procedure.
The actual vibration emission value can differ from the stated value, depending on
the kind of use. This can significantly increase the vibration load throughout
operation.
The actual vibration emission value can differ from the stated value, depending on
the kind of use.
The vibration level can be used for comparisons with other power tools.
It is also suited for a preliminary estimation of the vibration load.
For an exact estimation of the vibration load, you should also take into account the
time during which the device is switched off, or is running but not actually being
used. This can significantly decrease the vibration load throughout operation.
Establish additional safety measures to protect the operator from the impact of
vibrations, for example: servicing power tools and insertion tools, keeping hands
warm, carrying out work steps in an organised sequence.
Please consider any local regulations concerning noise protection!
24
:
20/40 V
XYZ562a
20 V
21 V
XYZ563a
79,8 dB (A); K=3,0 dB(A)
0,48 m/s
; K=1,5 m/s
2
2
III
90 Wh/ Li-ion
(×2)/ 90 Wh = approx. 95 min.
/ 4.0 A
Advertisement
Table of Contents
