Table of Contents
Advertisement
Operation
4. Lift the safety bar
8
The motor starts and the cutting blades begin to rotate.
The motor runs and the cutting blades rotate as long as the lock bar is raised.
You can let go of the lock button as soon as the motor is running.
5. To switch the lawnmower off again, release the safety bar so that it lowers to its
normal position. The motor will stop.
6. Wait until all rotating parts have come to a complete standstill.
Using the grass collection box
1. Put the plastic straps of the grass catcher basket over the grass catcher frame.
2. Ensure that the safety key
3. Open the safety flap
4. Lift the flap and place the grass collection box
Ensure it is tight.
5. Switch the lawnmower on as described in the "Switching on/off" chapter.
The mown grass is collected in the grass collection box.
Emptying the grass collection box
The fill level indicator
when operating. If the fill level indicator remains closed during operation, this
means that the grass collection box is full and must be emptied.
1. Stop mowing and switch the lawnmower off.
2. Wait until all rotating parts have come to a complete standstill and the
lawnmower has cooled down completely.
Ensure that the safety key
3. Remove the grass collection box and shake the grass out.
The lawnmower can also be used without the grass collection box. The
mown grass is then spread directly back onto the lawn by the grass
discharge. In this case, do not open the safety flap during operation
18
1
.
14
is removed.
6
above the grass discharge.
3
is opened by the air flow into the grass collection box
14
is removed.
13
5
on the grass discharge.
5
6
.
Advertisement
Table of Contents
