Keysight ENA Series Service Manual
  1. Manuals
  2. Brands
  3. Keysight Manuals
  4. Test Equipment
  5. ENA Series
  6. Service manual
Keysight ENA Series Service Manual

Keysight ENA Series Service Manual

Configurable multiport test set
Hide thumbs Also See for ENA Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Keysight E5092A
ENA Series Configurable
Multiport Test Set
Service Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENA Series and is the answer not in the manual?

Questions and answers

Related Manuals for Keysight ENA Series

Summary of Contents for Keysight ENA Series

  • Page 1 Keysight E5092A ENA Series Configurable Multiport Test Set Service Guide...
  • Page 2 EULA. governed by United States and Declaration of Conformity Keysight shall be under no obligation international copyright laws. to update, revise or otherwise modify Trademark Acknowledgments Declarations of Conformity for this the Software.

  • Page 3: Caution

    Such noncompliance would also violate safety standards of design, manufacture, and intended use of the instrument. Keysight Technologies assumes no liability for the customer’s failure to comply with these precautions. The E5092A complies with INSTALLATION CATEGORY II as well as POLLUTION DEGREE 2 in IEC61010-1.
  • Page 4 To avoid the danger of introducing additional hazards, do not install substitute parts or perform unauthorized modifications to the instrument. Return the instrument to a Keysight Technologies Sales and Service Office for service and repair to ensure that safety features are maintained in operational condition.

  • Page 5: Safety Symbols

    Certification Keysight Technologies certifies that this product met its published specifications at the time of shipment from the factory. Keysight Technologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Technology, to the extent allowed by the Institution’s calibration facility or by the calibration facilities of other...
  • Page 6 Caution Safety Symbols For any assistance, contact your nearest Keysight Technologies Sales and Service Office. Addresses are provided at the back of this manual. Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 7: Table Of Contents

    Test equipment ............27 6. LOAD MATCH, INSERTION LOSS, ISOLATION for SWITCH 4 (SP4T, PORT 4, 4A, 4B, 4C and Keysight E5092A Service Guide...
  • Page 8 1D) ..............51 Load Match, Insertion Loss and Isolation Test for Switch 2(SP4T, Port 2, 2A, 2B, 2C and 2D) Load Match, Insertion Loss and Isolation Test for Switch 3 (SP4T, Port 3, 3A, 3B, 3C and Keysight E5092A Service Guide...
  • Page 9 Bottom View (Semirigid Cables) (SPDT) ........171 Keysight E5092A Service Guide...
  • Page 10 Cutting supply of power ..........215 Keysight E5092A Service Guide...

  • Page 11: General Information

    Keysight E5092A ENA Series Configurable Multiport Test Set Service Guide General Information The Service Manual is a guide to servicing the E5092A Configurable Multiport Test Set. The manual contains information requisite to do performance tests, adjustments, troubleshootings, and repairs. Organization of Service Manual Tabs are used to divide the major chapters and appendices of this manual.

  • Page 12: Instrument Covered By This Manual

    Manual Changes supplement. The supplement for this manual is identified by this manual's printing data and is available from Keysight Technologies. If the serial prefix or number of an instrument is lower than that on the title page of this manual, see Appendix A, Manual Changes.

  • Page 13: Required Equipment

    Keysight 10833A Cable USB Cable USB2-30 Adapter SMB(m)-BNC(f) Adapter Keysight p/n 1250-3938 Adapter BNC T Adapter (f)-(m)-(f) Keysight p/n 1250-0781 Torque Wrench Keysight p/n 8710-1766 1. P: Performance Tests, A: Adjustment Tests Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 14 General Information Required Equipment Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 15: Performance Tests

    Service Guide Performance Tests This chapter provides information on how to verify the E5092A performance. Introduction This literature provides the performance test procedures for the Keysight E5092A. The performance test names are listed in Table 2-1. The test procedures are described sequentially in the following pages.

  • Page 16: Test Equipment Required

    Control Line Maximum Current Test Test Equipment Required The test equipment required to perform the entire performance test procedure is listed below. Test Equipment: Network Analyzer Keysight N5230A Opt. 240 or 245 Calibration kit Keysight 85052D Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 17: Dc Source Output Voltage Accuracy Test

     3% of setting (+ 1V to 5V) at 1M load impedance. Test equipment DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 18: Dc Source Maximum Current Test

    @ 23 °C  5 °C (Warming up over 90 minutes) 150 mA for each source. Test equipment DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 19: Load Match, Insertion Loss, Isolation Test For Switch

    Load Match (Common port) SP4T Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 20 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 21: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 22: Load Match, Insertion Loss, Isolation Test For Switch

    Load Match (Common port) SP4T Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 23 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 24: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 25: Load Match, Insertion Loss, Isolation For Switch

    Load Match (Common port) SP4T Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 26 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 27: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 28: Load Match, Insertion Loss, Isolation For Switch

    Load Match (Common port) SP4T Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 29 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 30: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 31: Load Match, Insertion Loss, Isolation For Switch 5 (Spdt, Port 5, 5A And 5B)

    Load Match (Common port) SPDT Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 32 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 33: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 34: Load Match, Insertion Loss, Isolation For Switch 6 (Spdt, Port 6, 6A And 6B)

    Load Match (Common port) SPDT Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 35 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 36: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 37: Load Match, Insertion Loss, Isolation For Switch 7 (Spdt, Port 7, 7A And 7B)

    Load Match (Common port) SPDT Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 38 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 39: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 40: Load Match, Insertion Loss, Isolation For Switch 8 (Spdt, Port 8, 8A And 8B)

    Load Match (Common port) SPDT Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 41 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 42: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 43: Load Match, Insertion Loss, Isolation For Switch 9 (Spdt, Port 9, 9A And 9B)

    Load Match (Common port) SPDT Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 44 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 45: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 46: Load Match, Insertion Loss, Isolation For Switch 10 (Spdt, Port 10, 10A And 10B)

    Load Match (Common port) SPDT Switch Specification 50 MHz to 2 GHz 16 dB 2 GHz to 4 GHz 11 dB 4 GHz to 8 GHz 8 dB 8 GHz to 10 GHz 7 dB Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 47 2 GHz to 6 GHz 90 dB 6 GHz to 10 GHz 85 dB 8 GHz to 10 GHz 75 dB 10 GHz to 18GHz 65 dB 18 GHz to 20 GHz Over arbitary test ports Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 48: Test Equipment

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 49: Control Line Maximum Current Test

    Test equipment Network Analyzer Keysight N5230A Opt. 240 or 245 DC Power Supply Keysight E3631A Digital Multimeter Keysight 34410A Multifunction Switch/Measure Unit Keysight 34980A 40-Channel Armature Multiplexer for 34980A Keysight 34921A Keysight E5092-66590 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 50: E5092A Performance Test Record

    DC Source Maximum Current Test Control Line Group Lower Test Limit Test Limit[mA] Measurement [mA] Uncertainty [mA]  150  0.0582  150  0.0582  150  0.0582  150  0.0582 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 51 Keysight E5092A ENA Series Configurable Multiport Test Set Service Guide Load Match, Insertion Loss and Isolation Test for Switch 1 (SP4T, Port 1, 1A, 1B, 1C and 1D) Load Match (Unselected) Port Frequency Test Limit Test Result [dB] Measurement (Selected...
  • Page 52 50M to 3G < -17.0 3G to 10G < -11.0  0.37 10G to 16G < -8.0  0.28 16G to 18G < -6.0  0.28  0.35 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 53 < -11.0  0.28 3G to 8G < -8.0  0.18  0.28 8G to 10G < -7.0  0.29 10G to 18G < -4.0 18G to 20G < -4.0  0.29 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 54 50M to 1.3G < -16.0 (1A) 1.3G to 4G < -11.0  0.23 4G to 8G < -8.0  0.12  0.13 8G to 10G < -7.0  0.10 10G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 55 < -16.0  0.30 (1D) 1.3G to 4G < -11.0  0.23  0.12 4G to 8G < -8.0  0.13 8G to 10G < -7.0 10G to 20G < -4.0  0.10 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 56 > -7.5  0.09 8G to 10G > -8.5  0.24 10G to 14G > -9.5  0.29  0.29 14G to 18G > -10.5  0.63 18G to 20G > -12.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 57 > -7.5  0.09 8G to 10G > -8.5  0.24 10G to 14G > -9.5  0.29  0.29 14G to 18G > -10.5  0.63 18G to 20G > -12.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 58 1G to 2G < -85.0 2G to 6G < -90.0  0.76 6G to 10G < -85.0  0.66  0.54 10G to 18G < -75.0  0.43 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 59 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 60 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 61 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 62 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 63 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 64 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 65 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 66 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 67 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71  0.44 10G to 18G < -75.0  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 68 50M to 3G < -17.0 3G to 10G < -11.0  0.37 10G to 16G < -8.0  0.28  0.28 16G to 18G < -6.0  0.35 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 69 50M to 3G < -17.0 3G to 10G < -11.0  0.37 10G to 16G < -8.0  0.28 16G to 18G < -6.0  0.28  0.35 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 70 < -11.0  0.28 3G to 8G < -8.0  0.18 8G to 10G < -7.0  0.28  0.29 10G to 18G < -4.0  0.29 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 71 < -16.0  0.30 1.3G to 4G < -11.0  0.23 4G to 8G < -8.0  0.12  0.13 8G to 10G < -7.0  0.10 10G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 72 > -7.5  0.09  0.24 8G to 10G > -8.5 10G to 14G > -9.5  0.29 14G to 18G > -10.5  0.29 18G to 20G > -12.0  0.63 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 73 > -7.5  0.09 8G to 10G > -8.5  0.24 10G to 14G > -9.5  0.29  0.29 14G to 18G > -10.5  0.63 18G to 20G > -12.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 74 < -85.0  0.60 2G to 6G < -90.0  0.76 6G to 10G < -85.0  0.66  0.54 10G to 18G < -75.0  0.43 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 75 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 76 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 77 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 78 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 79 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 80 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71  0.44 10G to 18G < -75.0  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 81 < -85.0  0.62 2G to 6G < -90.0  0.71  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 82 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 83 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 84 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 85 50M to 3G < -17.0 3G to 10G < -11.0  0.37 10G to 16G < -8.0  0.28  0.28 16G to 18G < -6.0  0.35 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 86 50M to 3G < -17.0 3G to 10G < -11.0  0.37 10G to 16G < -8.0  0.28 16G to 18G < -6.0  0.28  0.35 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 87 < -11.0  0.28 3G to 8G < -8.0  0.18 8G to 10G < -7.0  0.28  0.29 10G to 18G < -4.0  0.29 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 88 < -16.0  0.30 1.3G to 4G < -11.0  0.23 4G to 8G < -8.0  0.12  0.13 8G to 10G < -7.0  0.10 10G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 89 > -7.5  0.09  0.24 8G to 10G > -8.5 10G to 14G > -9.5  0.29 14G to 18G > -10.5  0.29 18G to 20G > -12.0  0.63 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 90 > -7.5  0.09 8G to 10G > -8.5  0.24 10G to 14G > -9.5  0.29  0.29 14G to 18G > -10.5  0.63 18G to 20G > -12.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 91 < -85.0  0.60 2G to 6G < -90.0  0.76 6G to 10G < -85.0  0.66  0.54 10G to 18G < -75.0  0.43 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 92 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 93 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 94 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 95 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 96 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 97 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71  0.44 10G to 18G < -75.0  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 98 < -85.0  0.62 2G to 6G < -90.0  0.71  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 99 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 100 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 101 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 102 50M to 3G < -17.0 3G to 10G < -11.0  0.37 10G to 16G < -8.0  0.28  0.28 16G to 18G < -6.0  0.35 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 103 50M to 3G < -17.0 3G to 10G < -11.0  0.37 10G to 16G < -8.0  0.28 16G to 18G < -6.0  0.28  0.35 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 104 < -11.0  0.28 3G to 8G < -8.0  0.18 8G to 10G < -7.0  0.28  0.29 10G to 18G < -4.0  0.29 18G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 105 < -16.0  0.30 1.3G to 4G < -11.0  0.23 4G to 8G < -8.0  0.12  0.13 8G to 10G < -7.0  0.10 10G to 20G < -4.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 106 > -7.5  0.09  0.24 8G to 10G > -8.5 10G to 14G > -9.5  0.29 14G to 18G > -10.5  0.29 18G to 20G > -12.0  0.63 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 107 > -7.5  0.09 8G to 10G > -8.5  0.24 10G to 14G > -9.5  0.29  0.29 14G to 18G > -10.5  0.63 18G to 20G > -12.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 108 < -85.0  0.60 2G to 6G < -90.0  0.76 6G to 10G < -85.0  0.66  0.54 10G to 18G < -75.0  0.43 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 109 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 110 < -85.0  0.60  0.76 2G to 6G < -90.0  0.66 6G to 10G < -85.0 10G to 18G < -75.0  0.54 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 111 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 112 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 113 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 114 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71  0.44 10G to 18G < -75.0  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 115 < -85.0  0.62 2G to 6G < -90.0  0.71  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 116 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 117 < -85.0  0.62  0.71 2G to 6G < -90.0  0.71 6G to 10G < -85.0 10G to 18G < -75.0  0.44 18G to 20G < -65.0  0.36 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 118 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 119 < -11.0  0.27 4G to 8G < -8.0  0.18  0.28 8G to 10G < -7.0  0.29 10G to 18G < -4.0 18G to 20G < -4.0  0.29 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 120 6G to 8G > -7.0 8G to 10G > -8.0  0.24 10G to 14G > -8.5  0.23 14G to 18G > -10.0  0.29  0.59 18G to 20G > -11.5 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 121 < -85.0  0.60 2G to 6G < -90.0  0.76  0.66 6G to 10G < -85.0  0.54 10G to 18G < -75.0 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 122 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 123 < -11.0  0.27 4G to 8G < -8.0  0.18  0.28 8G to 10G < -7.0  0.29 10G to 18G < -4.0 18G to 20G < -4.0  0.29 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 124 6G to 8G > -7.0 8G to 10G > -8.0  0.24 10G to 14G > -8.5  0.23 14G to 18G > -10.0  0.29  0.59 18G to 20G > -11.5 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 125 < -85.0  0.60 2G to 6G < -90.0  0.76  0.66 6G to 10G < -85.0  0.54 10G to 18G < -75.0 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 126 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 127 < -11.0  0.27 4G to 8G < -8.0  0.18  0.28 8G to 10G < -7.0  0.29 10G to 18G < -4.0 18G to 20G < -4.0  0.29 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 128 6G to 8G > -7.0 8G to 10G > -8.0  0.24 10G to 14G > -8.5  0.23 14G to 18G > -10.0  0.29  0.59 18G to 20G > -11.5 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 129 < -85.0  0.60 2G to 6G < -90.0  0.76  0.66 6G to 10G < -85.0  0.54 10G to 18G < -75.0 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 130 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 131 < -11.0  0.27 4G to 8G < -8.0  0.18  0.28 8G to 10G < -7.0  0.29 10G to 18G < -4.0 18G to 20G < -4.0  0.29 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 132 > -7.0  0.09  0.24 8G to 10G > -8.0  0.23 10G to 14G > -8.5 14G to 18G > -10.0  0.29 18G to 20G > -11.5  0.59 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 133 < -85.0  0.60 2G to 6G < -90.0  0.76  0.66 6G to 10G < -85.0  0.54 10G to 18G < -75.0 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 134 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 135 < -11.0  0.27 4G to 8G < -8.0  0.18  0.28 8G to 10G < -7.0  0.29 10G to 18G < -4.0 18G to 20G < -4.0  0.29 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 136 > -7.0  0.09  0.24 8G to 10G > -8.0  0.23 10G to 14G > -8.5 14G to 18G > -10.0  0.29 18G to 20G > -11.5  0.59 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 137 < -85.0  0.60 2G to 6G < -90.0  0.76  0.66 6G to 10G < -85.0  0.54 10G to 18G < -75.0 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 138 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 139: Load Match, Insertion Loss And Isolation Test For Switch

    < -11.0  0.27 4G to 8G < -8.0  0.18  0.28 8G to 10G < -7.0  0.29 10G to 18G < -4.0 18G to 20G < -4.0  0.29 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 140 > -7.0  0.09  0.24 8G to 10G > -8.0  0.23 10G to 14G > -8.5 14G to 18G > -10.0  0.29 18G to 20G > -11.5  0.59 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 141 < -85.0  0.60 2G to 6G < -90.0  0.76  0.66 6G to 10G < -85.0  0.54 10G to 18G < -75.0 18G to 20G < -65.0  0.43 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 142 1G to 2G < -85.0 2G to 6G < -90.0  0.71 6G to 10G < -85.0  0.71 10G to 18G < -75.0  0.44  0.36 18G to 20G < -65.0 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 143: Control Line Maximum Current Test

    Control Line Maximum Current Test Control Line Lower Test Test Result [mA] Measurement Group Limit [mA] Uncertainty [mA]  50  0.008856  50  0.008856  0.5  0.000046  0.5  0.000046 Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 144 Performance Tests E5092A Performance Test Record Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 145: Troubleshooting

    Keysight E5092A ENA Series Configurable Multiport Test Set Service Guide Troubleshooting This chapter provides procedure to isolate a faulty assembly in theE5092A. Introduction These servicing instructions are for use by qualified personnel only. To avoid possible electrical shock, do not perform any servicing unless you are qualified to do so.

  • Page 146: To Troubleshoot The E5092A

    If the E5092A setting does not work correctly, go to “E5092A Setting Troubleshooting”. Step 3. Check the measurement function (port characteristics) If the E5092A fails performance tests, go to “Performance Test Failure Troubleshooting”. Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 147 A faulty part is replaced according to Chapter 5 which gives replacement procedures for the parts. The procedure required after part replacement are given in Chapter 6. Figure 3-2 Primary trouble isolation flowchart Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 148: Power Supply Troubleshooting

    Step 3. Measure the output voltage (+5, +15, -15 V) of the power supply unit using a voltmeter with a small probe. The voltages locations on the A1 Switch control board are shown in Figure 3-3. Figure 3-3 Output Voltage Location Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 149 + 4.75 to + 5.25 + 15 V + 14.25 to 15.75 - 15 V - 14.25 to -15.75 • If the voltmeter reading is within the limits, the power supply is verified. Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 150: E5092A Setting Troubleshooting

    Step 6. Press Property to enable (ON) the control of the E5092A as shown in Figure 3-4. Figure 3-4 E5092A property The enable (ON)/disable (OFF) setting of theE5092A property display is executed for all channels. Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 151: Check The Temperature Control

    - Service Menu - Service Functions. Then password dialog box will appear. Enter the password kid in the password box and then click OK button. Step 4. Press E5092A Service Functions - E5092A ID(1). Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 152: Check The Voltage Output Of The Control Lines

    If the output voltage can not be varied from +2V to +5V though the A1 board works correctly, the A3 DUT control board is suspect. • If the output voltage is good, the A3 board is verified. Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 153: Check Control Lines Setting

    If any of the voltages of the control lines are not the same voltages as the pin 12 or pin 15, the A3 board is suspect. • If all the voltages of the control lines are good, the A3 board is verified. Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 154: Performance Test Failure Troubleshooting

    Load Match, Insertion Loss and Isolation Test for Switch Switch 9 (SPDT) 9(SPDT, 9COM, 9A and 9B) Load Match, Insertion Loss and Isolation Test for Switch Switch 10 (SPDT) 10(SPDT, 10COM, 10A and 10B) Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 155 Performance test failure troubleshooting information Failed Test Probable faulty board assembly or parts Control Line Maximum Current Test SW Control USB PCA (E5092-66601) / SW Indicator LED PCA (E5092-66602) / DUT Control PCA (E5092-66603) Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 156 Troubleshooting Performance Test Failure Troubleshooting Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 157: Replaceable Parts Ordering Information

    Ordering Information To order parts listed in the replaceable part lists, quote the Keysight part number (with a check digit), indicate the quantity required, and address the order to the nearest Keysight office. The check digit will ensure accurate and timely processing of the order.
  • Page 158 Replaceable Parts Ordering Information Mail order forms and specific ordering information are available through your local Keysight sales office. Addresses and telephone numbers are located in a separate document shipped with the manuals. Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 159: Replaceable Parts List For E5092A-020

    Description Desig. E5092-66601 SWITCH CONTROL USB PCA E5092-66602 SWITCH INDICATOR LED PCA E5092-66603 DUT CONTROL PCA P9397-60001 20GHz SPDT PIN SWITCH MODULE P9398-60001 20GHz SP4T PIN SWITCH MODULE E5092-00103 RF SW CHASSIS Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 160: Top View (Major Assemblies) (Under Switch Control Usb Pca)

    Top View (Major Assemblies) (Under Switch Control USB PCA) Table 4-2 Top View (Major Assemblies) (Under Switch Control USB PCA) Ref. Keysight Part Number Qty. Description Desig. 0950-3642 POWER SUPPLY 50-WATT 3-OUTPUT Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 161: Top View (Cables)

    Replaceable Parts Replaceable Parts List for E5092A-020 Top View (Cables) Figure 4-3 Top View (Cables) Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 162 E5092-61603 WIRE ASSY E5092-61647 WIRE ASSY E5092-61645 WIRE ASSY E5092-61656 WIRE ASSY E5092-61601 WIRE ASSY E5092-61645 WIRE ASSY E5092-61607 FLAT CABLE ASSY E5092-61606 FLAT CABLE ASSY E5092-61646 WIRE ASSY 1400-0493 CABLE TIE Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 163: Top View (Cables) (Under Switch Control Usb Pca)

    Top View (Cables) (Under Switch Control USB PCA) Table 4-4 Top View (Cables) (Under Switch Control USB PCA) Ref. Keysight Part Number Qty. Description Desig. E5092-61604 WIRE ASSY E5092-61605 WIRE ASSY 04288-61633 WIRE ASSY Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 164: Top View (Semirigid Cables) (Sp4T)

    Replaceable Parts Replaceable Parts List for E5092A-020 Top View (Semirigid Cables) (SP4T) Figure 4-5 Top View (Semirigid Cables) (SP4T) Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 165 RF CABLE ASSY SEMI-RIGID E5092-61627 RF CABLE ASSY SEMI-RIGID E5092-61624 RF CABLE ASSY SEMI-RIGID E5092-61625 RF CABLE ASSY SEMI-RIGID E5092-61626 RF CABLE ASSY SEMI-RIGID E5092-61630 RF CABLE ASSY SEMI-RIGID E5092-61648 RF CABLE ASSY SEMI-RIGID Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 166: Top View (Semirigid Cables) (Spdt)

    Top View (Semirigid Cables) (SPDT) Ref. Keysight Part Number Qty. Description Desig. E5092-61609 RF CABLE ASSY SEMI-RIGID E5092-61610 RF CABLE ASSY SEMI-RIGID E5092-61611 RF CABLE ASSY SEMI-RIGID E5092-61644 RF CABLE ASSY SEMI-RIGID Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 167: Top View (Miscellaneous Parts)

    Top View (Miscellaneous Parts) Ref. Keysight Part Number Qty. Description Desig. 0515-0372 SCREW MACH M3X0.5 1400-1391 CLAMP-CABLE STL 0515-1403 SCREW SPECIALTY M4X0.7 0515-1400 SCREW MACH M3X0.5 3050-0891 WASHER 1400-0611 CLAMP 0515-1946 SCREW MACH M3X0.5 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 168: Top View (Miscellaneous Parts) (Under Switch Control Usb Pca)

    MY481/2, SG481/2) SG483) E5092-00104 CHASSIS E5092-00154 (White color) (Grey color) E5092-00101 RF CHASSIS E5092-00151 (White color) (Grey color) 0515-1946 SCREW MACH M3X0.5 0515-1946 0515-0433 SCREW MACH M4X0.7 0515-0433 0515-0372 SCREW MACH M3X0.5 0515-0372 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 169: Bottom View (Cables)

    Replaceable Parts List for E5092A-020 Bottom View (Cables) Figure 4-9 Bottom View (Cables) Table 4-9 Bottom View (Cables) Ref. Keysight Part Number Qty. Description Desig. E5092-61646 WIRE ASSY E5092-61667 CABLE ASSY THERMOSENSOR Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 170: Bottom View (Semirigid Cables) (Sp4T)

    RF CABLE ASSY SEMI-RIGID E5092-61618 RF CABLE ASSY SEMI-RIGID E5092-61617 RF CABLE ASSY SEMI-RIGID E5092-61615 RF CABLE ASSY SEMI-RIGID E5092-61614 RF CABLE ASSY SEMI-RIGID E5092-61613 RF CABLE ASSY SEMI-RIGID E5092-61622 RF CABLE ASSY SEMI-RIGID Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 171: Bottom View (Semirigid Cables) (Spdt)

    Bottom View (Semirigid Cables) (SPDT) Ref. Keysight Part Number Qty. Description Desig. E5092-61643 RF CABLE ASSY SEMI-RIGID E5092-61641 RF CABLE ASSY SEMI-RIGID E5092-61640 RF CABLE ASSY SEMI-RIGID E5092-61642 RF CABLE ASSY SEMI-RIGID Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 172: Bottom View (Miscellaneous Parts)

    Keysight Part Description Keysight Part Desig Number (For Serial Number (For Serial Number MY481/2, Number MY483, SG481/2) SG483) 5040-3347 PLATE 5040-3347 0460-0616 TAPE-INDL .5-IN-W 0460-0616 .005-IN-T E5092-00104 CHASSIS E5092-00154 (White color) (Grey color) Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 173: Sp4T Switch Assembly (Top View)

    SP4T SW BIAS PIN ADAPTER PCA E5092-61645 WIRE ASSY 0515-0372 SCREW MACH M3X0.5 3050-0891 WASHER 0515-0372 SCREW MACH M3X0.5 0515-0375 SCREW MACH M3X0.5 0515-0372 SCREW MACH M3X0.5 E5092-01218 SIDE RIB1 E5092-01219 SIDE RIB2 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 174: Sp4T Switch Assembly (Bottom View)

    Replaceable Parts Replaceable Parts List for E5092A-020 SP4T Switch Assembly (Bottom View) Figure 4-14 SP4T Switch Assembly (Bottom View) Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 175 Description Desig. E5092-01216 BRACKET2 E5092-25003 SIDE INSULATOR1 E5092-25004 SIDE INSULATOR2 0515-2693 SCREW MACH M3X0.5 0515-0372 HT-SK T092 E5092-66505 SP4T SW BIAS PIN ADAPTER PCA E5092-25005 SPACER1 0515-0372 SCREW MACH M3X0.5 E5092-25006 SPACER2 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 176: Spdt Switch Assembly (Top View)

    SCREW MACH M3X0.5 0515-0372 SCREW MACH M3X0.5 3050-0891 WASHER 0535-0031 NUT-HEX W/LOCK WASHER M3X0.5 0515-0372 SCREW MACH M3X0.5 0515-2078 SCREW MACH FLT-HD M3X0.5 E5092-25002 INSULATOR2 E5092-25001 INSULATOR1 E5092-66504 SPDT SW BIAS PIN ADAPTER PCA Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 177: Spdt Switch Assembly (Bottom View)

    SPDT Switch Assembly (Bottom View) Ref. Keysight Part Number Qty. Description Desig. 0515-0372 SCREW MACH M3X0.5 E5092-66504 SPDT SW BIAS PIN ADAPTER PCA 0515-0665 SCREW MACH M3X0.5 E5092-00105 DRAWER ASSEMBLY 0515-2078 SCREW MACH FLT-HD M3X0.5 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 178: Front Panel

    Desig Number (For Serial number MY481/2 and SG481/2) E5092-00204 FRONT SHEET 5022-1188 FRONT FRAME 5041-9176 TRIM STRIP 0515-1946 SCREW MACH M3X0.5 1401-0245 PROTECTIVE CAP 1250-1251 ADAPTER - COAXIAL 5041-0564 1251-7812 JACKSCREW CONNECTOR Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 179 PANEL FRONT, PHANTOM GRAY 5022-3382 FRONT FRAME (Grey Color) 5042-8439 TRIM FRONT FRAME (Grey Color) 0515-1946 SCREW MACH M3X0.5 1401-0245 PROTECTIVE CAP 1250-1251 ADAPTER - COAXIAL E5092-40051 KEY CAP (Grey Color) 1251-7812 JACKSCREW CONNECTOR Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 180: Rear View

    Table 4-19 Rear View (For MY481/2 and SG481/2) Ref. Keysight Part Description Desig Number (For Serial Number MY481/2, SG481/2) 0515-1402 SCREW MACH M3.5X0.6 0515-1946 SCREW MACH M3X0.5 9320-6627 LABEL 2110-1017 FUSE E5100-40002 STANDOFF Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 181 Rear View (For MY483 and SG483) Ref. Description Keysight Part Desig Number (For Serial Number MY483, SG483) 0515-1402 SCREW MACH M3.5X0.6 0515-1946 SCREW MACH M3X0.5 9320-6627 LABEL 2110-1017 FUSE E5061-40052 FOOT, REAR, PHANTOM GRAY Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 182: Side View

    5041-9186 CAP - STRAP HANDLE 5042-6813 RETAINER - FRONT (Grey Color) 5041-9167 FOOT 5041-9167 1460-1345 TILT STAND 1460-1345 5021-2840 KEY LOCK 5021-2840 0515-1384 SCREW MACH M5X0.8 0515-1384 5041-9167 FOOT 5041-7906 (Carbon Black) Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 183 Keysight Part Desig Number (For Serial Number (For Serial Number MY481/2 Number MY483 and SG481/2) and SG483) 5021-2840 KEY LOCK 5021-2840 5041-9187 CAP - STRAP HANDLE 5042-6814 RETAINER - REAR (Grey Color) Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 184: Led Assembly

    Replaceable Parts Replaceable Parts List for E5092A-020 LED Assembly Figure 4-22 LED Assembly Table 4-22 LED Assembly Ref. Keysight Part Number Qty. Description Desig. E5092-66602 SW INDICATOR LED PCA 0515-0430 SCREW MACH M3X0.5 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 185: Other Parts

    1. The number indicated by “x” in the part number of each manual and CD-ROM, 0 for the first edition, is incremented by 1 each time a revision is made. The latest edition comes with the product. 2. Opt. 0BW only Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 186 Replaceable Parts Replaceable Parts List for E5092A-020 Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 187: Replacement Procedure

    Keysight E5092A ENA Series Configurable Multiport Test Set Service Guide Replacement Procedure This chapter provides procedure for removing and replacing the major assemblies in the E5092A. Replacing an Assembly The following steps show the sequence to replace an assembly in a E5092A.

  • Page 188: Required Tools

    √ √ SP4T Raptor Holder √ √ √ √ √ SPDT Switch Drawer √ √ √ √ √ SPDT Switch √ √ √ √ √ Switch Indicator LED √ √ √ √ Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 189: Replacement Procedure For E5092A-020

    Step 5. Remove the four bottom feet (item 4). Step 6. Remove the two TORX T10 screws (item 5) fastening the cover from the bottom. Step 7. Slide the outer cover and remove it carefully. Figure 5-1 Outer Cover Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 190: Front Chassis Detachment

    Step 5. Remove the five TORX T10 screws (item 8 ) fastening the bottom chassis. Step 6. Slide the front chassis forward to detach from the back chassis. Figure 5-2 Front chassis Detachment Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 191: Front Frame Removal

    Step 5. Remove the three TORX T15 screws (item 8 ) fastening the bottom frame. Step 6. Slide the front frame and remove from the front chassis. Figure 5-3 Front Frame Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 192: A1 Switch Control Board Removal

    Step 3. Remove the two TORX T10 screws (item 1) from the rear panel. Step 4. Remove the six TORX T10 screws (item 2) fastening the A1 board. Step 5. Remove the A1 board from the chassis. Figure 5-4 A1 Switch Control Board Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 193: Power Supply Assembly Removal

    Step 3. Disconnect the two power cable (item 1). Step 4. Remove the four TORX T10 screw (item 2) from the bottom. Step 5. Remove the power supply board from the chassis. Figure 5-5 Power Supply Assembly Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 194: Power Switch Removal

    Step 6. Disjoint the joint (item 4) from the power switch and the rod. Step 7. Remove the two TORX T10 screws (item 5) from the chassis and remove the power switch. Figure 5-6 Power Switch Assembly Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 195: Main Board Removal

    Step 4. Remove the three TORX T10 screws (item 1) from the assembly. Step 5. Remove the four hex nut (item 2) from the assembly. Step 6. Lift the main board from the assembly. Figure 5-7 Main Board Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 196: Sp4T Switch Assembly Removal

    Step 9. Turn the front chassis over and remove the eight semi rigid cables (item 4) from the bottom SP4T switch assembly. Step 10. Remove the six TORX T10 screw (item 5) on the SP4T switch assembly and remove the bottom two SP4T switches. Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 197 Replacement Procedure Replacement Procedure for E5092A-020 Figure 5-8 SP4T Switch Assembly Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 198: Sp4T Raptor Holder Assembly Removal

    Step 8. Remove the semirigid cable (item 3) on the SPDT switch assembly. Step 9. Remove the six TORX T10 screw (item 4) holding the SP4T raptor holder assembly and lift the raptor holder assembly. Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 199 Replacement Procedure Replacement Procedure for E5092A-020 Figure 5-9 SP4T Raptor Holder Assembly Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 200: Spdt Switch Drawer Removal

    Step 11. Remove the six TORX T10 screw (item 5) from the front panel and remove the front sheet. Step 12. Remove the four TORX T10 screw (item 6) from the front chassis and slide out the SPDT switch drawer (item 7). Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 201 Replacement Procedure Replacement Procedure for E5092A-020 Figure 5-10 SPDT Switch Drawer Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 202: Spdt Switch Assembly Removal

    Step 10. Remove the three semi rigid cables (item 4) connecting the SPDT switch to the front panel. Step 11. Repeat Step 8 to Step 10 for the three SPDT switches on the other side of the SPDT drawer assembly. Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 203 Replacement Procedure Replacement Procedure for E5092A-020 Figure 5-11 SPDT Switch Assembly Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 204: Switch Indicator Led Pca Removal

    Step 6. Remove the two TORX T10 screws (item 2 and item 3) securing the switch indicator LED PCA to the front panel.. Step 7. Remove the switch indicator LED PCA from the assembly (item 4). Figure 5-12 Switch Indicator LED PCA Removal Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 205: Post-Repair Procedures

    Keysight E5092A ENA Series Configurable Multiport Test Set Service Guide Post-Repair Procedures This chapter lists the procedures required to verify the E5092A operation after an assembly is replaced with a new one. Post-Repair Procedures Table 6-1 Post Repair Procedures lists the required procedures that must be performed after the replacement of an assembly.
  • Page 206 Switch Bias Pin needed - Write SN Adapter PCA) - Load Match, Insertion Loss and (E5092-66504) Isolation Test for Switch 6 (SPDT, 6COM, 6A and 6B) - LED Check - DCBUS Check Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 207 Switch Bias Pin needed - Write SN Adapter PCA) - Load Match, Insertion Loss and (E5092-66504) Isolation Test for Switch 10 (SPDT, 10COM, 10A and 10B) - LED Check - DCBUS Check Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 208 Switch Bias Pin needed - Write SN Adapter PCA) - Load Match, Insertion Loss and (E5092-66505) Isolation Test for Switch 4 (SP4T, Port4, 4A, 4B, 4C and 4D) - LED Check - DCBUS Check Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 209 Perform the following performance tests. SPDT Pin Switch needed - Write SN Module) - Load Match, Insertion Loss and (P9397-60001) Isolation Test for Switch 8 (SPDT, 8COM, 8A and 8B) - LED Check - DCBUS Check Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 210 SP4T Pin Switch needed - Write SN Module) - Load Match, Insertion Loss and (P9398-60001) Isolation Test for Switch 2 (SP4T, Port2, 2A, 2B, 2C and 2D) - LED Check - DCBUS Check Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 211 SP4T Pin Switch needed - Write SN Module) - Load Match, Insertion Loss and (P9398-60001) Isolation Test for Switch 4 (SP4T, Port4, 4A, 4B, 4C and 4D) - LED Check - DCBUS Check Keysight E5092A ENA Series Configurable Multiport Test Set...
  • Page 212 Post-Repair Procedures Post-Repair Procedures Keysight E5092A ENA Series Configurable Multiport Test Set...

  • Page 213: A.power Requirement

    Use the fuse that meets the following specifications. UL/CSA type, Slo-Blo, 520 mm miniature fuse, 3A 250V (Keysight part number: 2110-1017) Spare fuses are available from Keysight Technologies sales office. To check or replace the fuse, disconnect the power cable and pull out the fuse holder.

  • Page 214: Power Cable

    For protection from electrical shock, the power cable ground must not be defeated. The power plug must be plugged into an outlet that provides a protective earth ground connection. Keysight E5092A Service Guide...

  • Page 215: Turning The Power On And Off

    If you need to cut the supply of power to avoid danger of electric shocks, disconnect the plug of the power cable (on the power outlet side or the E5092A side). To turn OFF the power in normal times, be sure to follow the procedure in “Turning OFF power”. Keysight E5092A Service Guide...
  • Page 216 Power Requirement Turning the Power ON and OFF Keysight E5092A Service Guide...
  • Page 217 This information is subject to change without notice. © Keysight Technologies 2009-2019 Edition 4, May 2019 E5092-90100 E5092-90100 www.keysight.com...

This manual is also suitable for:

E5092a

Table of Contents