Electrolux EW9W1165RC User Manual page 10

4. Open the door and remove the
polystyrene piece from the door seal and
all the items from the drum.
5. Carefully put the appliance down on its
rear side.
6. Put the front polystyrene packaging
element on the floor under the appliance.
Make sure not to damage the hoses.
7. Remove the polystyrene protection from
the bottom.
10 ENGLISH
8. Pull up the appliance in vertical position.
9. Remove the power supply cable and the
drain hose from the hose holders.
It is possible to see water flowing
from the drain hose. This is due to
the testing with water of the appliance
in factory.
10. Remove the three bolts by using the
spanner supplied with the appliance.
1
2