Troubleshooting - BOMANN KSG 7289 Instruction Manual

Beverage cooler

Hide thumbs

Table Of Contents

Table of Contents

Available languages

A permanently high power level can lead to in-

creased ice formation

wipe the interior dry.

Changing the light

CAUTION:

Do NOT remove the cover of the light. The LED light

may be replaced / repaired in case of failure / defect

only by an authorized specialist.

Notes for the authorized specialist!

Lamp data: LED max. 10 W, 220∼240 V

This product contains a light source of energy effi-

ciency class G.

• Disconnect the appliance from the power supply!

• Loosen the lamp cover with a screwdriver and re-

move it downwards.

• Replace the defective lamp.

• Insert and fasten the lamp cover properly.

Replacing the door hinge

If the appliance door starts to stutter, crack or jam

when you open it, it is probably due to a worn or

damaged hinge.

It is recommended to replace all door hinges at the

same time, otherwise the next repair will soon be

beckoning.

• Remove the contents of the appliance and the

movable interior parts.

• Tilt the appliance backwards and block it in this

position to prevent the door from sliding out.

→ set a lower power level and

• Loosen the hinge cover as described under

versing the door opening"

upper door hinge.

• Turn out the stand and disassemble the lower

door hinge.

• The respective hinge assembly is carried out in

reverse order.

• Open and close the appliance door for a test run,

readjust the hinges if necessary. In any case,

make sure that the door fits tightly and accurately.