Subaru BRZ 2016 Service Manual page 80

Hide thumbs Also See for BRZ 2016:
Table of Contents

Advertisement

PRE-DELIVERY INSPECTION
6) After turning off the engine, wait five minutes or
more for the oil to return to the oil pan before check-
ing the oil level.
NOTE:
To prevent overfilling of engine oil, do not add oil
above "F" mark when the engine is cold.
(A)
(A) Oil level gauge
(B) Oil filter
(C) Oil filler cap
(D) "F" mark
(E) "L" mark
(F) Approx. 1.0 L (1.1 US qt, 0.9 Imp qt)
14.TRANSMISSION GEAR OIL
CAUTION:
If transmission gear oil is spilt over the exhaust
pipe, wipe it off with a cloth to avoid emitting
smoke or causing a fire.
Check for leakage of the transmission gear oil.
15.AUTOMATIC TRANSMISSION FLUID
CAUTION:
If automatic transmission gear oil is spilt over
the exhaust pipe, wipe it off with a cloth to avoid
emitting smoke or causing a fire.
Check for leakage of the automatic transmission
gear oil.
Pre-delivery Inspection
(B)
(C)
(D)
(F)
(E)
PI-00812
PI-8
16.REAR DIFFERENTIAL GEAR OIL
CAUTION:
If the rear differential gear oil is spilt over ex-
haust pipe, wipe it off with cloth to avoid emit-
ting smoke or causing a fire.
Check for leakage of gear oil from the rear differen-
tial.
17.ENGINE COOLANT
CAUTION:
If the engine coolant is spilt over exhaust pipe,
wipe it off with cloth to avoid emitting smoke or
causing a fire.
Check that the engine coolant level on the reservoir
tank is normal. If the amount of engine coolant is in-
sufficient, check that no leaks are found. Then, add
the necessary amount of coolant with the specified
concentration.
18.CLUTCH FLUID
CAUTION:
If any clutch fluid is spilt on the exhaust pipe,
wipe it off with a cloth to avoid emitting smoke
or causing a fire.
Check that the clutch fluid level is normal. If the
amount of fluid is insufficient, check that no leaks
are found. Then, add the necessary amount of
specified fluid.
(A)
(B)
(A) MAX. level
(B) MIN. level
PI-00762

Advertisement

Table of Contents
loading

Table of Contents