Subaru BRZ 2016 Service Manual page 126

PERIODIC MAINTENANCE SERVICES
(4) Remove the four cushion rubbers and the exhaust tail pipe assembly.
(5) Loosen the hose clamp, and disconnect the fuel tank to filler pipe hose.
CAUTION:
• Before performing the procedures, remove any foreign material such as mud adhering to the con-
necting parts of the fuel tank to filler pipe hose.
• Be careful not to spill fuel.
(6) Set a steel container under the vehicle and use a gasoline-resistant hose (10 mm (0.39 in) or less) to
drain the fuel from the opening of the fuel tank to filler pipe hose.
CAUTION:
Be careful not to spill fuel.
NOTE:
Always be sure to use a steel container and ground the container as gasoline can easily become charged
with static electricity.
(7) Install the fuel tank to filler pipe hose using hose clamps.
Tightening torque:
2.0 N·m (0.2 kgf-m, 1.5 ft-lb)
12) Disconnect the ground cable from battery.
13) Remove the separator-type rear seat cushion assembly LH.
Fuel Filter
PM-36
PM-10009