Subaru BRZ 2016 Service Manual page 79

10.FRONT HOOD LOCK RELEASE SYSTEM
Operate the front hood lock release lever to check
that the front hood is unlocked normally.
Operate the lever (A) and check that the front hood
is opened normally.
11.BATTERY
Check the battery terminals to make sure that there
are no rust or corrosions due to fluid leaks. Check
that the battery caps are securely tightened.
(B)
(C)
(A) Cap
(B) Upper level
(C) Lower level
Pre-delivery Inspection
12.BRAKE FLUID
CAUTION:
If the brake fluid is spilt over exhaust pipe, wipe
it off with cloth to avoid emitting smoke or
causing a fire.
Check that the brake fluid level is normal. If the
amount is insufficient, carry out a brake line test to
identify brake fluid leaks and check the brake oper-
ation. After that, refill the brake fluid tank with the
specified type of fluid.
PI-00780
(A)
13.ENGINE OIL
PI-10025
CAUTION:
If engine oil is spilt onto the exhaust pipe, wipe
it off with cloth to avoid emission of smoke or
causing a fire.
1) Park the vehicle on a level surface.
2) Remove the oil level gauge and wipe away the
oil.
(A)
3) Reinsert the oil level gauge all the way. Be sure
that the oil level gauge is correctly inserted and
properly orientated.
4) Pull out the oil level gauge again, and check both
sides of the oil level gauge. Use a lower side to de-
termine the engine oil level. If the engine oil level is
below "L" mark, add oil to bring the level up to "F"
mark.
5) Start the engine, and spread the oil in engine.
PI-00012
PI-7
PRE-DELIVERY INSPECTION
(A) MAX. level
(B) MIN. level
(A)
(B)
PI-00791