Network - Zip IP-CAM350 Manual

5.3.3 Network

Click on Network Parameters in Network to open the following page:
5.3.3.1 Network
Type: DHCP (Automatically Acquired), PPPOE, Static (Manually Configured – Default)
Client Port: Media (management) port Default = 8240
HTTP Port: Web port Default = 80
IP Address: IP address (Default = 192.168.10.1)
Subnet Mask: Subnet Mask (Default = 255.255.255.0)
Gateway: Default gateway of the device ( Default = 192.168.10.254)
DNS 1: Preferred DNS Server (Default = 192.168.10.254)
DNS 2: Alternate DNS server (Default = 8.8.8.8)

UPNP Untick to disable UPNP function for the IP camera (Default = Enabled)
Note: To enable UPNP, the client/mobile phone port should be set to a value
between 1024-65535.

P2P Switch Untick to disable P2P function for the IP camera (Default = Enabled)
Port Range 1024 – 65535 (Client Port)
25