Roi (Region Of Interest) - Zip IP-CAM350 Manual

5.3.1.4

ROI (Region of Interest)

Click on ROI in Camera Menu to open the following page:
What is ROI (Region of Interest)
Region of Interest is where you want to select from 1 to 8 areas in a picture with improved frame
rate and quality, so allowing non-ROI areas to preview in lower frame rate and quality settings. The
benefit is lower storage requirements for data and better preview of areas most important to the user.
Procedure for setting ROI:
1. Choose an area of application
2. Press down and hold the left mouse button and draw out an ROI area (only one ROI can be set
for each area) but up to 8 areas can be selected.
3. Click on Save to apply the ROI area.
Stream Type: Choose from MainStream / SubStream / MobileStream (which is the lowest quality)
Region: 1 ~ 8. (Up to 8 ROI areas can be set in one bit stream).
ROI area: Enable or disable the ROI area
ROI Level: Worst / Worse / Bad / Normal / Better / Best Set quality of the image in the area.
Non-ROI FPS (1 ~ 24): (default = 24)
Sets the frame rate of the non-RIO area; a smaller value indicates a higher-quality image in the ROI
area. The range of frame rate is in relation to video standard and resolution.
22