Table of Contents
Advertisement
Connecting to a device using an Ethernet Cable
If your device does not support Wi-Fi or you would like to maximise the reliability of your connection, you can
access the Roam Combo internet connection by connecting the Ethernet Cable between the LAN ports on the
router and your device. Possible applications for this include some Smart TV's and desktop computers.
To do this, simply connect the Ethernet cable to the router and your device. If necessary, navigate to your
devices LAN settings and follow the prompts.
When the ethernet is in use other devices can still connect to the router using Wi-Fi
!
Factory Reset
At any time, the Roam Combo router can be reset to its factory settings using the reset button on the side of
the router. This will restore all settings on the router, including:
• Router SSID (network name) and password to those listed on the back of the router.
• Web User Interface to the username and password listed on the front of the router.
• All custom settings will be deleted, including any Wi-Fi connections you may have added.
1.
To complete the factory reset,
press and hold down the reset
button with the supplied pin
needle.
2.
Hold for 6 seconds, until all of
the green LEDS on the side of the
router are on.
Once released all 5 signal strength
LED's will flash together.
This indicates the start of the reset
process.
Note: If you don't hold
!
long enough, the router
will restart but not reset.
3.
Allow 3 minutes for the router
to reset. Once reset the Wi-Fi
network will be visible and
available to connect to.
19
Advertisement
Table of Contents
