Table of Contents
Advertisement
10.5 Regenerate the softening
system
In order to maintain the trouble-free
function of the softening system, the
device regenerates the softening
system at regular intervals.
The softening system is regenerated
in all programs before the end of the
main rinse cycle. The running time and
consumption values increase, e.g. B.
Water and electricity.
Overview of the consumption values
when regenerating the
Softening system
Here you will find an overview of the
maximum additional running time and
consumption values when regenerating
the softening system.
Regenerate the softening
system after x rinsing
cycles
Additional runtime in
minutes
Additional water consumption
in liters
Additional consumption of electricity
in kWh
The stated consumption values are
laboratory measurements according
to the currently valid standard and
determined using the Eco 50°
program and the factory-set water
hardness value of 13 - 16 °dH.
11 Rinse aid system
11.1 Rinse aid
For optimal drying results, use rinse
aid.
Only use rinse aid designed for
household dishwashers.
Fill in rinse aid
If the display shows "Please refill rinse
aid.", refill rinse aid. Only use rinse aid
designed for household dishwashers.
The tab on the lid of the rinse aid
1.
reservoir
press and lift.
6
6
5
0.05
Fill in the rinse aid up to the max
2.
mark.
If rinse aid has overflowed, remove
3.
it from the rinse container.
Rinse aid system
2
1
Max
31
Advertisement
Table of Contents
