Table of Contents
Advertisement
Cleaning and care
phase
distance from
2
food residues
and deposits
For optimal cleaning performance, the
program doses the cleaners separately
in the corresponding cleaning phase.
This requires the correct placement of
the cleaners.
If the machine care indicator on the
control panel lights up or the display
advises you to do so, carry out the
machine care without dishes. After you
have carried out the machine
maintenance, the display goes out. If
your device does not have a reminder
function, we recommend carrying out
machine maintenance every 2 months.
Carry out machine maintenance
Hints
¡Run the machine program
Carry out cleaning without the dishes
being put away.
¡Use only specifically for
Machine care products and machine
cleaners suitable for dishwashers.
¡Make sure that there are no
Aluminum parts, e.g. B. grease filters from
extractor hoods or aluminum pots are
located in the washing compartment of the
appliance.
¡If you care for the machine
If you have not carried out 3 rinse
cycles, the machine care display will
automatically go out. ¡In order to
achieve optimal cleaning performance
To maintain safety, pay attention to the
correct placement of the cleaners.
¡Note the Si
refer to the packaging for
machine care products
machine cleaners.
46
cleanser
Machine cleaner
safety
ackings of
tteln and mat-
placement
Cleaner chamber
¡Turn on the function
→ "glassZone", page 27
Remove any coarse dirt in the
1.
interior with a damp cloth.
Clean the sieves.
2.
Place the machine care product
3.
inside the device.
Only use machine care products
that are specifically designed for
dishwashers.
Pour the machine cleaner into the
4.
cleaner chamber until it is
completely full.
Do not add machine cleaner to the
interior of the device.
press.
5.
press.
6.
aMachine maintenance is carried out
leads.
aWhen the program is finished,
the machine care display goes out.
17.5 Sieve system
The sieve system filters coarse
impurities from the flushing circuit.
3
2
1
to.
Advertisement
Table of Contents
