Table of Contents
Advertisement
When using for the first time: Fill
2.
the storage container completely
with water.
A notice:Only use special salt for
3.
dishwashers.
Do not use salt tablets. Do not
use table salt.
Pour the special salt into the storage
container.
Fill the storage container completely
with special salt. The water in the
storage container is displaced and
drains away.
Place the lid on the storage
4.
container and screw it on.
10.4 Switch off the softening
system
If the special salt refill indicator
bothers you, e.g. B. if you use
combined cleaners with salt
substitutes, you can switch off the
special salt refill indicator.
Notice
To avoid damage to the device, only
switch off the softening system in the
following cases: ¡The water hardness
level is maximum
times 21 °dH and you use a
combined cleaner
salt substitutes. K
niger with salt substitute
According to the manufacturera
combined rice
substances can
information mostly
Only use up to a water hardness of
21 °dH without adding special salt.
¡The water hardness level is 0 -
6 °dH. You can do without special
salt.
press.
1.
To open the basic settings,
2.
press.
aThe display shows H:xx.
The display shows .
or press until the display shows
3.
H:00.
To save the settings,
4.
Press for 3 seconds.
aThe softening system is equipped
switches on and the salt refill
indicator is deactivated.
10.5 Regenerate the softening
system
In order to maintain the trouble-free
function of the softening system, the
device regenerates the softening
system at regular intervals.
The softening system is regenerated
in all programs before the end of the
main rinse cycle. The running time and
consumption values increase, e.g. B.
Water and electricity.
Overview of the consumption values
when regenerating the
Softening system
Here you will find an overview of the
maximum additional running time and
consumption values when regenerating
the softening system.
Regenerate the softening
system after x rinsing
cycles
Softening systemde
3 seconds
a
6
29
Advertisement
Table of Contents
