Table of Contents
Advertisement
8.2 Preparations/concluding work
8.2.1 Opening/closing the protection hood
8.2.1.1
Opening the protection hood
2
1
Fig. 59
1
Fig. 60
Maintenance – Preparations/concluding work
Certain maintenance tasks require preparations and concluding
activities.
This includes e.g. opening and closing maintenance flaps and
maintenance doors as well as securing certain components.
After this work close all maintenance flaps and doors again and
return all components to their operating condition.
Protective equipment:
1.
Remove the rear screws (2) on both sides of the machine.
2.
Put the screws (2) and the matching washers to the side.
3.
Loosen the front screws (1) on both sides.
4.
Fold the protection hood forward.
B-692-0203
5.
Secure the protection hood against accidental closing.
For this tighten the screw (1) on both sides.
B-692-0204
DRP45DX
n
Working clothes
n
Protective gloves
67
Advertisement
Table of Contents
