Proper Usage; Warranty; Maintenance Checklist; Product Specifications - Matrix Ultra Series Instructions Manual

PROPER USAGE

1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion adjustment,
or any other type of adjustment mechanisms to a comfortable start position.
Make certain that the adjusting mechanism is fully engaged to prevent
unintentional movement and to avoid injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.

MAINTENANCE CHECKLIST

ACTION
Clean Upholstery *
Inspect Cables
Clean Guide Rods
Inspect Hardware
Inspect Frame
Clean Machine
Clean Grips *
Lubricate Guide Rods †
* Upholstery & Grips should be cleaned with a mild soap and water or a non-
ammonia based cleaner.
† Guide rods should be lubricated with Teflon based lubricant. Apply the
lubricant to a cotton cloth and then apply up and down the guide rods.
FREQUENCY
Daily
Daily
Monthly
Monthly
Bi-Annually
As Needed
As Needed
As Needed
PLEASE NOTE:
Be sure to remove the insulating sheet when installing the rep counter.

WARRANTY

For North America, please visit www.matrixfitness.com for warranty information
along with warranty exclusions and limitations.

PRODUCT SPECIFICATIONS

Maximum User Weight
Maximum Training Weight
Product Weight
Overall Dimensions
(L x W x H)*
* Ensure a minimum clearance width of 0.6 meters (24") for access to and pas-
sage around MATRIX strength equipment. Please note, 0.91 meters (36") is the
ADA recommended clearance width for individuals in wheelchairs.
136 kg / 300 lbs.
91 kg / 200 lbs.
302 kg / 666 lbs.
150 x 119 x 130 cm /
59" x 47" x 51"
3