Spreading Settings - Dcm 2500 PRO Manual

Table of Contents

Advertisement

Available languages

Available languages

SPREADING SETTINGS

Product type
DCM fertiliser in
MINIGRAN® form
DCM fertiliser in crumble
form
DCM fertiliser in pellet
form
DCM granulated lime
DCM grass seeds
**
Example: If you want to spread a DCM Fertiliser in MINIGRAN® at a dose of 8 kg/100 m². Divide the
amount of fertiliser into two equal parts and push the lever of your DCM SPREADER 2500 PRO to
setting 15. Spread 1 part in the lengthwise direction of the area. You have now spread ± 4 kg/100 m².
Then spread the other part in the width-wise direction. You have now spread a total of ± 8 kg/100 m²
(see walking pattern on previous page).
The manufacturer cannot be held responsible for any differences in the quantity spread per square metre or in the
4
spreading width due to possible variations in spreading material, application conditions and application techniques of
the user. The settings listed in the spreading settings table serve as a guideline only. Differences in physical properties or
material type, a different walking speed, differences in soil surface hardness or other variations in application conditions
and/or techniques may require slightly different spreader settings. Due to the above factors, De Ceuster Meststoffen N.V.
cannot guarantee that a spreader set according to the listed settings will spread the material evenly.
4
Spreading
Slider adjuster
width* (metre)
setting
± 2,75 m
4 clicks left
adjuster**
± 3 m
3 clicks left
adjuster**
± 3,75 m
/
± 4 m
4 clicks left
adjuster**
± 2 m
/
* The spreading width of the DCM SPREADER 2500 PRO depends on the
type of product. The spreading widths listed in the above table are the total
spreading widths = sum of the spreading distance left and right.
Slider type
Dose
summer
4-5 kg/100 m²
6-7 kg/100 m²
8-10 kg/100 m²
summer
4-5 kg/100 m²
6-7 kg/100 m²
8-10 kg/100 m²
winter
4-5 kg/100 m²
6-7 kg/100 m²
8-10 kg/100 m²
summer
4-5 kg/100 m²
6-7 kg/100 m²
8-10 kg/100 m²
10-12 kg/100 m²
winter
1-2 kg/100 m²
2-3 kg/100 m²
Position
control lever
EN
15 (x1)
12 (x2)
15 (x2)
20 (x1)
18 (x2)
20 (x2)
16 (x1)
20 (x1)
16 (x2)
20 (x1)
18 (x2)
20 (x2)
17 (x3)
14 (x1)
16 (x1)
49

Advertisement

Table of Contents
loading

Related Products for Dcm 2500 PRO

Table of Contents