Safety Instructions; General Instructions; Recognize Safety Information; Understand Signal Words - Dometic 9500 Installation Instructions Manual

SAFETY INSTRUCTIONS

This manual has safety information and instruc-
tions to help users eliminate or reduce the risk
of accidents and injuries.

RECOGNIZE SAFETY INFORMATION

This is the safety alert symbol. It is used to alert
you to personal injury hazards. Obey all safety
messages that follow this symbol to avoid pos-
sible injury or death.

UNDERSTAND SIGNAL WORDS

A signal word, when used with the safety alert
symbol, will identify a safety hazard and its level
of risk for personal injury. A signal word, without
the safety alert symbol, will be used for property
damage messages only.
WARNING indicates a hazard-
ous situation which, if not avoided, could result
in death or serious injury.
CAUTION, used with the safe-
ty alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
NOTICE is used to address
practices not related to personal injury.
Read and follow all safety information and
instructions to avoid possible injury or death.

GENERAL INSTRUCTIONS

These instructions must be read and under-
stood before installation of this hardware.
This hardware must be installed by a Dometic,
LLC Service Center or a qualified service
technician. Modification of this product can
be extremely hazardous and could result in
personal injury or property damage.
Required hardware:
8' - 13' Models Only:
(1)* Mounting Bracket
(12) M6 X 50 mm L Carriage Bolt
(12) M6 Split Lock Washer
(12) M6 Flat Washer
(12) M6 Locknut With Nylon Insert
(6) 8-18 X .38 Self Drilling Flat Head Screw
* Some models may have (3) short Mounting Brackets
Additional hardware quantities:
15' - 16' Models only:
(1) Mounting Bracket
(4) M6 X 50 mm L Carriage Bolt
(4) M6 Split Lock Washer
(4) M6 Flat Washer
(4) M6 Locknut With Nylon Insert
(2) 8-18 X .38 Self Drilling Flat Head Screw
Required tools:
3 mm Hex Key
6 mm Hex Key
Torque Wrench
6 mm Hex Key Socket
10 mm Socket
PH Phillips Head Screwdriver (or bit and drill)
Optional accessories:
3313887.000 Support Legs
A. Application
The cassette awning is ideal for use on RVs. It is especially
well suited for RVs with an over cab extension where there
is not sufficient surface for a bottom mounting bracket.
Cassette awnings can be installed by one person with
brief help from additional personnel. Use the following
procedure to ensure a properly installed, and properly
functioning awning.
Dometic, LLC reserves the right to modify appearances
and specifications without notice.
2