Wolf IG15/S Use & Care Information Manual page 8

W O L F
G R I L L M O D U L E
B E F O R E U S I N G F O R T H E F I R S T T I M E
Wash the grilling grate, grease deflection
plates and grease collection pan in warm
soapy water. This removes any residual oil and
grease left on the surface from the manufac-
turing process. The electric grill module must
be reassembled in the correct alignment as
shown on page 7.
Refer to Care Recommendations on page 13.
Apply a stainless steel polish to protect the
finish and add luster.
Allow a burn-in period of approximately 10
minutes before use. During the initial period of
use, you may smell a light burning odor or see
light smoke. Both these conditions are normal
with a new grill module.
C O N T R O L
The Wolf electric grill module operates by
automatically cycling the heating elements
between zero power and full power. As the
heat is increased on the control panel, the
element will stay at full power for longer
periods and have shorter periods of zero
power.
8
G R I L L M O D U L E U S E & C A R E
O P E R A T I O N
O P E R AT I O N
M O D E S O F O P E R A T I O N
L O C K M O D E
In Lock mode, all touch pad operations on
the control panel are disabled and the heating
elements are deenergized. A steady glowing
light in the "key" touch pad indicates that the
unit is locked. Refer to the illustration below
for location of the "key" touch pad.
To lock the control panel, touch and hold
the "key" symbol for 3 seconds. The unit
will beep three times and the light in the
"key" touch pad will illuminate. The control
unit is now in Lock mode.
To unlock the control panel, touch and hold
the "key" symbol for 3 seconds. The unit
will beep twice and the light in the "key"
touch pad will go out. The control unit is
now in Idle mode.
IMPORTANT NOTE: When the unit is powered
up for the first time or if there has been a
power outage, the grill module will default to
Lock mode.
I D L E M O D E
After unlocking the control panel as described
in Lock Mode, the unit enters the Idle mode of
operation. The valid touch pad operations are
OFF ON, CLEAR, "+" or "–" and the Lock
mode "key."
LED display Power indicator
indicator lights bar graph
Lock "key" SELECT
touch pad touch pad
Touch control panel
Temperature Timer LED
adjustment display
OFF ON CLEAR
touch pad touch pad