Wolf IG15/S Use & Care Information Manual page 11

W O L F G R I L L M O D U L E
To change individual power level settings
to the same setting, touch the SELECT touch
pad until the "BOTH" indicator light is
illuminated.
Enter any power level setting within five
seconds and both elements will be set to
that power level.
If only one element is energized and no
other setting is entered, both elements will
be set to the power level of that element.
If after five seconds no power level is
entered, both elements will be set to the
lower of the two power level settings.
To turn an element off individually, touch
the SELECT touch pad to select the element,
then touch OFF ON within 5 seconds. If the
OFF ON touch pad is touched after 5 seconds,
the entire unit will turn off.
To turn both elements off, touch the SELECT
touch pad until the "BOTH" indicator light is
illuminated, then touch the OFF ON touch pad
within 5 seconds to turn off both elements.
"+" and "–"
symbols
Timer
display
Timer controls
Dimensions in parentheses are in
millimeters unless otherwise specified.
U S E & C A R E
T I M E R
The control panel of the grill module has an
independent 99-minute timer. Refer to the
illustrations below. This function can be used
with or without the unit in operation. However,
the grill must not be in Lock mode.
To start the timer, touch the "+" or "–"
symbol until the correct amount of time is
shown in the timer display. The timer will
begin its countdown after a two-second
delay.
A warning beep will sound when the timer
has one minute left and begins to count-
down in seconds starting at 59.
A signal will beep when time has expired
and will continue to beep every 30 seconds.
Touch CLEAR to reset the timer.
Clear touch pad
O P E R A T I O N
CLEAR
touch pad
11