Searching For A Scene By Date Of Recording (Date Search); Searching For A Still Image (Photo Search); Playing Back Still Images In Sequence (Photo Scan) - Sony Handycam DCR-HC21 Operating Manual

Searching for a scene by date of
recording (Date search)
You can locate the point where the
recording date changes.
1
Slide the POWER switch down
repeatedly to turn on the PLAY/
EDIT lamp.
2
Press SEARCH M.
[DATE SEARCH].
3
Press (previous)/

to select a recording date.
Each time you press  or , your
camcorder searches for the previous
or next date from the current point on
the tape.
60min
To cancel the operation
Press STOP  .
• The Date search will not function correctly
when there is a blank section between recorded
sections on the tape.
Searching for a still image
(Photo search)
Your camcorder can search for the still
image automatically, regardless of the
recording date.
1
Slide the POWER switch down
repeatedly to turn on the PLAY/

to select

(next)

0:00:00:00
30min
DATE -01
SEARCH
EDIT lamp.
2
Press SEARCH M.
[PHOTO SEARCH].
3
Press (previous)/

to select a photo.
Each time you press  or , your
camcorder searches for the still image
before or after the current point on the
tape.
To cancel the operation

Press STOP .
• The Photo search will not function correctly
if there is a blank section between recorded
sections on the tape.
Playing back still images in
sequence (Photo scan)
You can locate still images one after
another and display each image for 5
seconds automatically.
1
Slide the POWER switch down
repeatedly to turn on the PLAY/
EDIT lamp.
2
Press SEARCH M.
[PHOTO SCAN].
3
Press (previous)/

To cancel the operation
Press STOP  .
• The Photo scan will not function correctly
if there is a blank section between recorded
sections on the tape.

to select

(next)


to select

(next) .

29