Recording Still Images On A Tape - Tape Photo Recording - Sony DCR-TRV940 Operating Instructions Manual

Recording still images on a tape
– Tape Photo recording
You can record still images such as photographs on tapes.
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a 60-minute tape.
(1) In the standby, set PHOTO REC in
(2) Keep pressing PHOTO lightly until a still image appears.
The CAPTURE indicator appears. Recording does not start yet.
To change from the selected still image to another image, release PHOTO once
and press it lightly again.
(3) Press PHOTO deeper.
The still image on the screen is recorded for about seven seconds. The sound
during those seven seconds is also recorded.
The still image is displayed on the screen until recording is completed.
Recording images with the flash
For the details, see page 48.
Recording images with self-timer
(1) Set PHOTO REC in
(2) Follow steps 1 and 3 on page 50.
to TAPE in the menu settings.
2
3
to TAPE in the menu settings (p. 209).
CAPTURE
•••••••
51