Winbook SI User Manual page 137

Chapter 8: Configuring & Maintaining Your System
The items with a [+]/[-] beside them are expandable categories. Hit
[Enter] to expand or collapse the category. [Ctrl]+[Enter] expands all
the categories.
To move a device up or down in the boot order, use the [+] or [-] key.
This is true of categories or devices within a category.
If you will be booting from a floppy or CD-ROM/R/RW drive, you should
set these devices to be checked prior to the Hard Drive category. If you
have a bootable add-in card, you should set this card to be checked prior to
the internal hard drive within the Hard Drive category.
Exit Menu
(Figure 8.7)
Once you have made the necessary changes to your Setup program,
you can use this menu to exit.
Exit Saving Changes: This item will save all the changes that you
made during this session and exit the Setup program. Your system will
then reboot with the new settings. If you notice any problems with the
operation of your system, you will need to re-enter the Setup program
and correct settings that might be causing the problems.
Exit Discarding Changes: This item will abandon all changes that you
have made to the Setup program in this session and exit the Setup program.
Load Setup Default: Restores all the values to the default settings that
were in place when you received your WinBook notebook. You can now
save these changes and exit or return to the other menus to make additional
changes.
Discard Changes: Restores all values to the settings that were in place
before you entered the Setup program. You can now save these changes
and exit or return to the other menus to make additional changes.
8.13