Camera And Video Management Commands; Camera Home - LEGRAND VADDIO EasyIP PCC Complete Manual

Complete Manual for the EasyIP PCC and PCC Mini Four-Camera Joystick Controllers

Camera and video management commands

The following commands are available for controlling connected cameras:

camera home

n
camera pan
n
camera tilt
n
camera zoom
n
camera focus
n
n camera preset
camera ccu
n
camera standby
n
video mute
n
video source
n
video resolution
n
You must specify the camera to be controlled, and the camera must be able to execute the command.
For example, only PTZ and ePTZ cameras can respond to the camera pan and camera tilt
commands.
Refer to the camera's Complete Manual for detailed information on available parameters and value
ranges. Some camera command parameters may be unavailable to the camera controller, although they
are available when controlling the camera directly via CLISH.
camera home
Moves the specified camera to its home position.
Synopsis camera <1..4> home
Required <1..4>
Example camera 1 home
Moves camera 1 to its home position.
Specify the camera to control.
28