Table of Contents
Advertisement
light sensor checked as soon as possible at an
authorized Audi dealer or qualified workshop.
A
WARNING
- Daytime running lights and automatic
headlights are only intended to assist
the driver. They do not relieve the driver
of his responsibility to check the head-
lights and to turn them on manually ac-
cording to the current light and visibility
conditions. For example, fog cannot be
detected by the light sensors*. So always
switch on the headlights ~D under these
weather conditions and when driving in
the dark.
- Crashes can happen when you cannot see
the road ahead and when you cannot be
seen by other motorists. Always turn on
the headlights so that you can see ahead
and so that others can see your car from
the back.
- Please obey all laws when using the
lighting systems described here.
@
Tips
- With the switch in AUTO front fog lights
and rear fog lights cannot be turned on
in addition.
- The light sensor for headlight control is
located in the rear view mirror mount.
You should therefore not apply any stick-
ers to the windshield in this area in order
to prevent malfunctions or failures.
- Some exterior lighting functions can be
adjusted ¢ page
61.
- When you remove your key from the igni-
tion while the vehicle's lights are turned
on, a buzzer sounds as long as the driv-
er's door is open.
- In cool or damp weather, the inside of
the headlights, turn signals and tail
lights can fog over due to the tempera-
ture difference between the inside and
outside. They will clear shortly after
M
"'
switching them on. This does not affect
0
~
the service life of the lighting.
rl
I.O
"'
rl
"'
rl
Clear
vision
61
- In the event of a light sensor malfunc-
tion, the driver is notified in the instru-
ment cluster display¢ page
35.
Adjusting exterior lighting
The functions are set in the MMI.
.,. Select:
!CAR !
function button
>
Systems*
control button > Exterior lighting . Or
.,. Select:
I
CAR
I
function button > Car systems*
control button > Vehicle settings
>
Exterior
light ing.
Coming home (Lights when leaving car),
Leaving home (Lights when unlocking car)
The coming home function illuminates the
area outside the vehicle when you turn the ig-
nition off and open the driver's door. Depend-
ing on vehicle equipment, the function can be
switched on and off or the length of ti me the
lights remain on* can be adjusted .
The leaving home illuminates the area outside
the vehicle when you unlock the vehicle . This
function can be switched on and off .
The Coming home and Leaving home func-
tions only operate when it is dark and the
light switch is in the AUTO position.
Daytime running lights
USA models:
The daytime running lights can
be turned on or off using this function.
Canada models:
The function cannot be
turned off. It is activated automatically each
time the ignition is turned on. This menu item
is shown "greyed out" .
Front fog lights
Fig.
57 Instrument panel: light switch
Advertisement
Table of Contents
