Audi Q7 2015 Owner's Manual page 127

Table of Contents

Advertisement

the 20 to 95 mph (30 to 150 km/h) speed
range .
ACC: Unavailable
The text message
ACC: Unavailable
appears,
for example, if t he temperature
of the brakes
is excessive. Adaptive cruise control is tempo-
rarily not available. A warning tone sounds as
a reminder .
ACC: Not available
The text message
ACC: Not available
appears
in the event of a ma lfuncti on. Adaptive cruise
control is turned off . A warning tone sounds
as a reminder. Have the system inspected by a
q ua lified dealership.
ACC: Sensor blocked
The text message
ACC: Sensor blocked
ap-
pears when the ACC System can no longer ac-
curately detect vehicles moving up ahead in
your lane of travel. Adaptive cruise control is
turned off. A warning tone also sounds as a re-
minder.
To decide whether it is necessary to switch off
the ACC (ACC : Sensor blocked) or if it is only a
temporary condition (ACC functionality limit-
ed) the system will take into cons ideration the
outside temperature
and/or the windshield
operat ion.
The ACC sensor is dirty or blocked (e.g. leaves,
snow).
The ACC sensor is located behind the area to
the right of the front license plate . If the ACC
sensor is dirty or blocked, clean the area to re-
store system operat ion.
ACC off: Manual control!
The text message
ACC off: Manual control!
appears afte r the vehicle has been brought to
a standstill by the adaptive cruise control. In
this case you must depress the brake peda l to
prevent the veh icle from rolling. A warn ing
""
tone sounds as a reminder.
N
0
...J
'SI:
,....,
\!)
..,.,
,....,
..,.,
,....,
Adaptive
cruise
control
125
Stabilization control (ESC)
The t ext message
Stabilization control (ESC)
appears if the Electronic Stabilization Control
(ESC) has intervened . In this case the adaptive
cruise control is automatically turned off . This
is accompanied by a warn ing tone.
Speed
The set speed in mph (Canada km/h) always
appears when saving or changing the speed in
adaptive cruise control
¢
page 118, How is
the speed stored? and r::!) page 119, Changing
stored speed.
ACC functionality limited
The message
ACC functionality limited
ap-
pears when the ACC System does not detect
any moving vehicles up ahead in your lane of
trave l for a longer period of time. During this
time, the distance to moving vehicles in your
lane of travel up ahead is not being ma in-
ta ined . The ACC system is not switched off,
and increased attent ion to the traffic situation
is absolutely necessary. The following may be
reasons why the message
ACC functionality
limited
appears :
- The ACC sensor is d irty . The ACC system is
not re act ing, or is not reacting correctly, to
moving vehicles up ahead in your lane of
t ravel.
- There may be very light traffic on and there
is nothing that ma rks the side of the road
(for examp le, guard ra ils, traffic signs,
trees). As soon as a moving vehicle up ahead
is detected again, ACC becomes active again
and the message disappears.
The ACC sensor is located be hind the area to
the right of the front license plate. If the ACC
senso r is dirty or blocked, clean the area to re-
store system operation.
Parking brake!
The text message
Parking brake!
appears,
when the parking brake is applied. ACC is
turned off . A warning tone sounds as a re -
minder.

Advertisement

Table of Contents
loading

Table of Contents