Advertisement
SETTING
THE
PAPER
1.
To feed cut sheet paper
@
In accordance with
the instructions on the plotter cover, set the paper select lever for the
size of the paper to be used.
The exact size of the paper may
be affected by temperature and humidity, so finely
adjust the paper select lever to the width of the paper used.
Paper select lever
A6
ROLL PAPER
AS
pm———= B5
A4
US LETTER
1]
1
1
,
1
T L
11
|~y
|
@
Hold the paper only along its edges.
If the paper is soiled by grease or sweat, the plotter
characters may be blurred.
/
Roller
%E
Ny
==
®
The
left wall
inside the unit serves as the paper guide.
When
inserting paper, position the
paper so that it is parallel with this wall.
Allow a slight clearance between the paper edge
and the wall, between 0.5 and 1 mm
(0.02 to 0.04 in.).
Feed the paper into the rollers and press the paper feed key.
The paper is now inserted.
Advertisement
