Notebook DriveDock+™ Installation Instructions Check the accessories with your Notebook DriveDock+. Please contact WiebeTech if any items are missing or damaged. The box should contain: Notebook DriveDock+ FireWire 400 cable Hard drive screws Rubber bumpers Manual and Warranty information Take a moment to familiarize yourself with the parts of your new Notebook DriveDock+. This will aid you in the remaining steps.
Page 2
WiebeTech LLC Connect the hard drive to the dock. If you’ve removed the drive from a laptop computer, it may be inside a mounting sleeve. You’ll need to remove this so that the drive will fit with the DriveDock. Place the drive onto the green plate with the label side up.
WiebeTech LLC Usage with Macintosh Computers Compatibility The Notebook DriveDock+ is fully plug-and-play under Mac OS 9.2 and OS X. No drivers are needed. The USB 2.0 port is USB 1.1 compatible. Mounting and Ejecting Volumes If the hard drive attached to the DriveDock is already formatted, an icon representing the drive’s volume will appear (mount) on the desktop.
Need help?
Do you have a question about the NBDDP and is the answer not in the manual?
Questions and answers