[ ENGLISHI
Basic Recording
Adjusting the LCD during PLAY
The LCD adjustmentmethod in PLAYERmode is identicalto step number 4 of page 30, exceptthe power switchmust
be set to PLAYER.
Controlling
the Sound from the Speaker
•t,
When you use the LCD monitor while playing back,
you can hear sound from the Speaker.
•t,
Volume of the Speaker is controlled by the UP/DOWN dial tab
on the camcorder.
•t,
if you close the LCD monitor, the LCD monitor and Speaker are
turned off.
•t,
if the speaker does not work properly, check the following:
•
is the LCD monitor closed?
•
Is the volume adjusted to a low level?
•
Is the speaker off? (see page 60)
Notes:
•
Lower the volume if vibration from the built-in speaker
causes screen disturbance.
•
Volume display will automatically disappear 2 seconds
after adjusting,
Viewing a Still Picture
•
Press INI (PLAY/STILL)buttonduring playback.
•
To resumeplayback, press the IHI (PLAY/STILL)button
again,
Picture Search
•
Keep pressing I,,_-(FF) or <_I(REW)
button during playback.
•
To resume normal playback, release the button.
PLAY/STILL
REW
FF
A