[ENGLISH 1
Troubleshooting
Symptom
I
Explanation/solution
A vertical stdpe appears when
_,
The contrast between the subject and the background is too great for the
you record a bright subject
camcorder to operate normally. Make the background bright to reduce the
against a dark background
contrast or use the BLC function while you are recording. (see page 4I)
(candle flame, for example).
The image quality on the LCD
*
The use of VIEWFINDER is recommended when recording under sunlight.
is poor.
(see page 7)
_,
Adjust the LCD. (see page 30)
The image in the viewfinder is
_,
The viewfinder lens has not been adjusted.
blurred.
Turn the viewfinder focus ring until the screen comes into sharp focus.
(see page 31)
The tape does not move when
_,
Set the POWER switch to PLAYER.
you press the Play, Fast
_,
You have reached the beginning or end of the cassette.
Forward or Rewind buttons.
The picture does not appear in
_,
The LCD mooitor is opened.
the viewfinder.
There is no sound from the
_,
Make sure the SPEAKER is ON. (see page 60)
SPEAKER when playing back
the tape.
The Date/Time or Title disap-
_,
The lithium battery is not installed or is fully used up.
peared even though you had it
(see page 21)
set.
,A