Samsung Hi8 SCL700 Owner's Instruction Book page 58

[ENGLISH 1
Playing back a Tape
Notes:
• SCL7OOlL71OlL75OlL770featureamonauralaudiosystem. lfyourTVorVCRarestereo,
connect the audio cable to input "L" of your TV or VCR.
• You can use an S-VIDEO cabIe to obtain better quality pictures if you have an S-VIDEO connector on your TV.
• While playing back on a TV screen, close the LCD panel Otherwise, picture distortion may occur.
Playback
I. Use the TVNIDEO button to select VIDEO on your TV.
2. Connect power source (battery or AC Power Adapter) to the camcorder.
Set the power switch to PLAYER mode.
3. Insert a tape you want to see.
• Make sure that STOP is displayed.
4. Press the I_11 (PLAY/STILL) button.
• The picture you recorded appears on the TV after 2 to 3 seconds.
• Press • (STOP) to stop playing.
• If the tape reaches its end during playback,
the tape will rewind automatically.
PLAYER
Notes:
• Vibration from the built-in speaker can cause picture distortion.
• It is best to turn the built-in speaker off when your camcorder is connected to the TV.
• The system (Hi8/8mm) is selected automatically, depending on the tape format.
• This camcorder does not support LP recording and playback.
PLAY/STILL
A