Konica Minolta bizhub PRESS C6000 Setup Instructions page 7
Hide thumbs
Also See for bizhub PRESS C6000:
- User manual (279 pages) ,
- Scanner manual (119 pages) ,
- Security manual (44 pages)
Table of Contents
Advertisement
7. Press Return and Close.
8. In Service Mode, select [System Setting] -> [Software Switch].
9. Set dipswitch 16 bit 7 to On(1) in order to use the Main Body NIC for vCare.
10. In Service Mode, select [System Setting] -> [Software Switch]. Set dipswitch 15 bit
5 to On(1). (Enables CSRC Communication for the engine).
11. Set dipswitch 14 bit 7 to On(1) to enable HTTP Communication
Konica Minolta bizhub PRESS C6000/C7000/C8000/C70hc Main Body bizhub vCare HTTP Setup Guide
Page 6 of 21
Advertisement
Table of Contents
