Table of Contents
Advertisement
4
Software Configuration
I
NTRODUCTION
The following provides details on the software configuration of the
the steps contained within this section for proper setup and configuration.
TOOLS REQUIRED
The following tools will be required for proper configuration of the system:
•
PC/Laptop
•
Ethernet cross-over cable, or other network connection to your
•
Standard web-browser such as Windows Edge, Mozilla Firefox, Apple Safari, or other.
•
MATRIX-2 Series
•
24 V AC power source
CONNECTING TO A MATRIX-2 SERIES DEVICE
The
MATRIX-2 Series
(
) on the primary Ethernet Port. Your laptop's network card must be configured in a manner
255.255.255.0
where it may access this IP network setting. Refer to your operating system documentation for details on
how to configure your network card.
Ethernet Settings
See
LOG-IN
To log-in to the
MATRIX-2 Series
1.
With your PC's network card configured, open any standard web browser.
2.
Browse to the
3.
If your connection is successful, the main login page of ASPECT will be displayed:
4.
Enter the case-sensitive default username and password into the fields provided.
5.
Click the
Log In
©ABB 2023 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
Cylon® MATRIX-2 Series |
License file pre-installed
device is shipped with a default IP address (
on page 22 for details on how to reconfigure
device:
IP address
of your MATRIX-2 Series device as defined during installation.
button.
Software Configuration
MATRIX-2 Series
hardware. Please follow
MATRIX-2 Series
device
) and subnet mask
192.168.1.251
MATRIX-2 Series
device IP Address.
12
Advertisement
Table of Contents
