Safety Notes - Sharp BP-1200S Setup Manual

Safety Notes

Before using this product, read "Safety Notes" carefully for
safety use.
This product and recommended supplies have been tested
and found to comply with strict safety requirements
including safety agency approvals and compliance with
environmental standards. Follow the following instructions
for safety use.
This product is not suitable for use in locations where
children are likely to be present.
Any unauthorized alteration including an addition of new
functions or connection to external devices may not be
covered by this product warranty. Contact your dealer or
nearest SHARP Service Department for more information.
Follow all warning instructions marked on this product. The
warning marks stand for the followings:
Used for item that if not followed
DANGER strictly, can lead death or severe or
fatal injuries and the possibility to do
it is comparatively high.
Used for items that if not followed
WARNING
strictly, can lead to severe or fatal
injuries.
Used for items that if not followed
CAUTION
strictly, can cause injuries to user or
damages to product.
: A symbol for items to pay attention to when handling
product. Follow instructions carefully to use product safely.
Caution Caution for Flammable
electrostatic
breakage
Moving Pinched fingers
object
Sharp edge
hazard
: A symbol for prohibited items. Follow instructions careful-
ly to avoid any dangerous acts.
Prohibited No fire
Do not tear Keep away
down from wet
: A symbol for items that must be performed. Follow in-
structions carefully to carry out these essential tasks.
Instructions Unplug Ground/Earth
WARNING
Explodable Electric
shock
Rotating parts
hazard
Do not touch Do not use in
bathroom
Never touch
with wet hand
Electrical Safety
This product shall be operated by the power source as indicated
on this product's data plate lavel. Consult your local power com-
pany to check if your power source meets the requirements.
WARNING: Connect this product to a protective earth
circuit.
Improper connection of a grounding conductor may
cause electric shock.
Plug the power cord directly into a grounded electrical
outlet. To prevent overheat and a fire accident, do not
use an extension cord, a multi-plug adaptor or a multiple
connector. Consult your local representative to check if an out-
let is grounded.
Connect this product to a branch circuit or an outlet that
has larger capacity than the rated ampere and voltage of
this product. See the data plate on the rear panel of this
product for its rated ampere and voltage.
Never touch the power cord with wet hands. It may
cause electric shock.
Do not put an object on the power cord.
Always keep the plug connection free of dust. The dusty
and damp environment may bring about minute electric
current in a connector. It may generate heat and eventu-
ally cause a fire accident.
To avoid the risk of electric shock and a fire accident,
only use the power cord supplied with this product or
the ones designated by our company. The power cord is
exclusive use for this product. Do not use it for any other prod-
uct. Do not damage or alter the power cord. Damage and alter-
ation may generate heat and eventually cause electric shock or
a fire accident. If the power cord is damaged or insulated wires
are exposed, contact your dealer or nearest SHARP Service De-
partment for its replacement. Do not use a damaged or uninsu-
Hot
lated cord to avoid the risk of electric shock and a fire accident.
surface
When cleaning this product, always switch off this prod-
uct and its switchboard (branch circuit). Access to a live
product interior may cause electric shock.
Do not unplug or re-plug this product with the switch on.
Plugging and unplugging a live connector may deform
the plug and generate heat, and eventually cause a fire
accident.
Hold the plug not the cord when unplugging this prod-
uct, or it may damage the cord and cause electric shock
or a fire accident.
Always switch off this product and its switchboard
(branch circuit) when it is not used over weekends or
long holidays. It may cause deterioration of insulations
and eventually electric shock or a fire accident.
Once a month, switch off this product and check if
the power cord is plugged firmly into an electrical out-
■
let;
the plug is not excessively heated, rusted or bent;
■
the plug and electrical outlet are free of dust; and
■
the power cord is not cracked or worn down.
■
Once you notice any unusual condition, switch off and unplug this
product first and contact your dealer or nearest SHARP Service
Department.
WARNING
CAUTION
3