Table of Contents
Advertisement
Windows® starts, and then the Device Screen appears.
The Device Screen shows the message "Please wait...
(Warming up) Approx. * minutes" (* is replaced by time
to wait in minutes).
Note
When powered on, the printer immediately gets started to
proceed with image quality adjustment, but it takes some
time before the printer becomes ready to print.
When the printer becomes ready to print (i.e. enters the
Standby mode), the message changes to "Printer Ready."
Powering Off
1.
Make sure all the printing is fi nished.
2.
Press the power switch on the printer unit to the lower
<
> (OFF) position.
The printer is turned off.
Note
The fan installed inside the printer keeps running for about
one hour after the power-off.
3.
In the Device Screen, select [System Menu] >
[Operation PC Shut Down].
2
4.
Click [Yes].
The Device Screen shuts down followed by Windows®
shutdown, and then the Operation PC is turned off.
Note
The monitor is turned off in conjunction.
5.
Shut down the Print Server.
For information on functions and operations of the Print
Server, refer to customer documentation supplied with
Print Servers.
Main Power Switch
If you turn off the main power, the power consumption can
be reduced. (but cannot be reduced to zero.)
Note that the machine needs more time to warm up if
switched on after the main power is off.
Open Covers of the Printer Output Unit and press the power
switch to the lower <
> (OFF) position.
Ground Fault Interrupter
When not using for an extended period or when moving the
unit, press the switch to turn the machine power off.
Note
Do not operate the switch under normal circumstances
because it is turned off when a current leakage is detected.
Switch
TEST button
Advertisement
Table of Contents
