Advertisement
Fenix G12-2
Tech area
G12-2 represent a major breakthrough in the 1/12 class. Nothing comes close to this 1/12 model.
We've had several drivers developing the car, from Club racers to ETS and Nationals A-main finalist,
and we'd like to thank all of them for the time and dedication they put in this project.
Front End: We choose to share the same front end used on G56.2, this allows you to use an easy and
proven system that allows you to alter camber, caster and dynamic caster.
Rear End: V-link: we spent quite a lot of time developing this rear end, using different brand of tires,
driving on carpet and asphalt.
G12.2 allow several different major setting, according their main chassis
V-Link suspension has the unique ability to alter the roll centre position.
You can alter significantly the amount of rear grip by changing the roll centre position.
B2 is very much like a common pivot rear suspension - A1 give the lowest roll centre.
Most of the time, you'll find a very comfortable setting using A2 or A3 position. Do not set the model in A4
Of course the 2 connection link must have the same length!!!
Here you can see how to set the V-link!
20
G12-2 Rev. 0.0.2
Advertisement
