Page 2
We have made every effort to make these instructions as easy to understand as possible. However, if you have any difficulties, problems, or questions, please do not hesitate to contact the Fenix support team at racing@fenixwaterjet.com . Also, please visit our Web site at www.
Page 13
Fenix mistral - 2017 Upside down steering = bumpy track, the car will be a little “wandering” On the chassis= more direct feeling, more precise...
Page 19
Fenix mistral - 2017 NOTE: PUT A DROP OF SHOCK OIL OVER THE SPHERE AND CAREFULLY TIGHT M2X6 SCREWS. THE SPHERE SHOULD MOVE FREELY WITHOUT TOO MUCH PLAY Note: when using the 7075 Alu chassis, use the provided 0,5 shims under all 5...
Page 20
Fenix mistral - 2017 Note: you might want to reduce the external diameter of the spring holder to get a more rearward battery fitting.
Page 27
Fenix mistral - 2017 Posizione della batteria - Battery position Cross battery, can be placed fully backward or 10mm toward the front end.
Page 28
Fenix mistral - 2017 Note: Using in line battery, FX1148 posts, might be used closer to the battery. Tech tip! When using “Slim” Shorty batteries, ballast can be locate below the batteries, getting the advantage by lowering the COG. Another good place, might be below the rear axle...
Need help?
Do you have a question about the Mistral 2017 and is the answer not in the manual?
Questions and answers