Page 1
PC to Component Video Transmitter # 549 over Cat5 Cable - 50m to 100m Operation Manual...
Page 2
Introduction The PC to Component Video Transmitter over Cat5 Cable - 50m to 100m is the transmitter (Tx) unit of Component over CAT5 solution, depends on the type of receiver (Rx) unit used. PC to Component Video Transmitter over Cat5 Cable - 50m to 100m can extend Component signal through CAT-5 cables for a distance up to 50/100 meters.
Page 3
Rear Panel 1. Power ON/OFF indicator. 2. DC 5V/1A: Power input. 3. CAT5-Out: Connected the video output to the video input of the CAT5 receiver unit using CAT-5 cable. 4. Switch: Select output audio source (SPDIF or L/R). Specifications Supported resolutions HD: up to 1080p;...
Need help?
Do you have a question about the 549 and is the answer not in the manual?
Questions and answers