Electricaj Connection - Miele ESW 700-25 Operating Instructions Manual

Electrical connection
either removing the fuse, shutting off
the power main or manually "trip-
ping" the circuit breaker.
Insta!lation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer will not be held
responsible.
!i Before connecting the appliance to
!: the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
i: electrician if in doubt.
Only operate the warming drawer
after it has been installed into the
countertop.
Installer:
Ptease Jeave these instructions with
the consumer.
Power suppJy
This appliance is equipped with a 5 ft
(1.5 m) long power cord with a
three-prong grounding plug ready for
connection to a 120 V, 15 A, 60 Hz
power supply.
Further installation details are on the
wiring diagram.
24