Safety Instructions; Intended Use Of The Product; Stuff Qualification; Special Hazards - promesstec WTR 120 User Manual

Resistance thermometer
Table of Contents

Advertisement

If possible store the device in its original package or an equivalent one.

3. Safety instructions

More important safety instructions can be found in the individual
chapters.

3.1 Intended use of the product

The sensor has been designed and built solely for the intended use described here
and may only be used accordingly. The technical specifications contained in these
operating instructions must be observed. Improper handling or operation of the in-
strument outside of its technical specifications requires the instrument to be taken
out of service immediately and an inspection by the manufacturer. When the instru-
ment is transported from a cold into a warm environment, the formation of conden-
sation may result in the instrument malfunctioning. Before putting it back into ope-
ration, wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation
contrary to the intended use.

3.2 Stuff qualification

Improper handling can result in considerable injury and damage to
equipment. The activities described in these operating instructions
may only be carried out by skilled stuff who have the qualifications
described below. Keep unqualified stuff away from hazardous areas.
For installation and starting of the flow-meter the stuff has to be familiar with the
relevant regulations and directives of the country and must have the qualification
required. They must have knowledge on measurement and control technology, have
to be acquainted with electric circuits, are capable of carrying out the work described
and can independently recognize potential hazards. Depending on the operation
conditions of the application they have to have the corresponding knowledge, e.g.
of aggressive media.

3.3 Special hazards

promesstec GmbH I Niedersachsenstraße 4 I D-48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wtr 120-5-b-1a3-kmuWtr 120-1-b-1a3-kmu

Table of Contents