5.2 Configuration KMU 100
If the WTR 120 is used with a KMU 100, the settings of the KMU can be read and
changed using the Windows software "PXU01". The PXU01 parameterization soft-
ware kit is required for this. This contains the Windows software "PXU01" on CD, an
interface converter (USB adapter) and a plug adapter for the SME. The following ex-
plains the configuration of the SME with the "PXU01" software.
5.2.1 Windows Software „PXU01"
The current settings of the KMU can be read and changed using the "PXU01" soft-
ware. The application installation file is provided via a CD or optionally via a down-
load link. To receive the link, contact promesstec GmbH.
The configuration options include, among other things, scaling the current output. In
addition, the measured value is read out in real time.
5.2.2 „PXU01" - connection between WTR 120-KMU and PC
Loosen the cover of the WTR 120 to access the programming interface of the KMU.
Connect the SME to the PC using the plug adapter and interface converter included
in the PXU01 parameterization software kit.
In order to access the device, a connection must first be established in the applica-
tion. The SME's settings can then be read and changed.
13
promesstec GmbH I Niedersachsenstraße 4 I D-48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com