Table of Contents
Advertisement
5.
Operation
Before switching on the device, it should be checked whether the sen-
sor has been correctly installed and wired.
5.1 Configuration DMU 100
If the WTR 120 is used with a DMU100, the DMU settings can be read out, graphi-
cally displayed and changed using the Windows software "pmtKonfigTool". The follo-
wing explains how to configure the DMU with the "pmt-KonfigTool" software.
5.1.1 Windows Software „pmtKonfigTool"
The current settings of the DMU can be read out and changed via the "pmtKon-fig-
Tool" software. The installation file of the application can be downloaded from the
website www.promesstec.de
promesstec GmbH I Niedersachsenstraße 4 I D-48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
Version 3.1.1
Advertisement
Table of Contents
