Table of Contents
Advertisement
Troubleshooting
18 Troubleshoot problems
You can fix minor problems with your device yourself. Use the troubleshooting
information before contacting customer service. This way you avoid unnecessary
costs.
Tip:Further information and explanations for troubleshooting can be found
online by scanning the QR code in the table of contents and on our website
siemens-home.bsh-group.com.
WARNING
Danger of electric shock!
Improper repairs are dangerous.
Only trained specialist personnel may carry out repairs on the device.
▶
Only original spare parts may be used to repair the device.
▶
If the mains connection cable of this device is damaged, it must be replaced
▶
with a special connection cable, which is available from the manufacturer or
its customer service.
Disturbance
E:30-00 lights up
Change.
E:31-00 lights up
Change.
E:32-00 lights up
Change or display
for water supply
shines.
46
Cause and troubleshooting
Water protection system is activated.
Close the faucet.
1.
Call customer service → Page 54 .
2.
Water protection system is activated.
Close the faucet.
1.
Call customer service → Page 54 .
2.
Inlet hose is kinked.
Lay the inlet hose without kinks.
▶
Faucet is closed.
Open the faucet.
▶
Faucet is jammed or calcified.
Open the faucet.
▶
The flow rate must be at least 10 l/min when the
water inlet is open.
Screens in the water connection of the inlet or
Aqua-Stop hose are clogged.
Turn off the device.
1.
Unplug the power plug.
2.
Turn off the tap.
3.
Unscrew the water connection.
4.
Advertisement
Table of Contents
