Table of Contents
Advertisement
19.2 Make the device frost-
proof
If the device is in a room at risk of
frost, e.g. B. in a holiday home, empty
the device completely.
Empty the device.
▶
→
"Transporting the device", page 53
19.3 Transporting the device
To avoid damage to the device,
empty the device before transport.
A notice:To ensure that no residual
water gets into the machine control and
causes damage to the device, only
transport the device upright.
Remove dishes from the
1.
appliance.
Secure loose parts.
2.
Switch on the device. → Page 35
3.
Select the program with the
4.
highest temperature.
→ "Programs", page 19
Start the program. → Page 35
5.
To empty the device, cancel the
6.
program after approx. 4 minutes.
→ "Cancel program", page
36
Switch off the device. → Page 36
7.
Close the tap.
8th.
To empty the remaining water from
9.
the device, turn off the inlet
Loosen the hose and let it drain
out.
Transport, storage and disposal
19.4 Dispose of old device
Valuable raw materials can be
reused through environmentally
friendly disposal.
WARNING
Risk of damage to health! Children can
become trapped in the device and
endanger their lives.
For old devices, pull the power plug
▶
of the power connection cable, then
cut the power connection cable and
destroy the lock on the device door
to such an extent that the device
door no longer closes.
Pull out the mains plug of the
1.
mains connection cable.
Cut the mains connection cable.
2.
Dispose of the device in an environmentally friendly
3.
manner.
You can obtain information about
current disposal routes from your
specialist dealer or your local or city
administration.
This device complies with
European standards
Directive 2012/19/EU
about old electrical and
electronic equipment (waste
electrical and electronic
equipment – WEEE).
The directive provides the
framework for an EU-
wide take-back and
Recycling of old devices.
53
Advertisement
Table of Contents
